name: Market & Opinion Research International Ltd (Ipsos MORI)

name: European Union Agency for Fundamental Rights

title: Roma and travellers survey 2018

description: The purpose of this procurement is to award a direct service contract for the provision of the Roma and travellers survey 2018. The overall objective of the contract is the implementation of a nationwide Roma face-to-face survey in six (6) EU Member States in order to collect comparable data on the living conditions and fundamental rights situation of persons who self-identify as Roma and travellers. The findings will provide evidence on progress made in Roma integration efforts to EU institutions and member states and will be used to populate indicators to assist the policy makers and other stakeholders in the review of the Europe 2020 strategy.

title: Roma and travellers survey 2018.

description: The overall objective of the contract is the implementation of a nationwide Roma face-to-face survey in 6 EU Member States in order to collect comparable data on the living conditions and fundamental rights situation of persons who self-identify as Roma and travellers.

street: Schwarzenbergplatz 11

countryName: AT

street: 3 Thomas Moore Square

postalCode: E1W 1YW


scheme: CPV

title: Framework contract(s) for the provision of mobile communication services and equipment outside Malta.

currency: EUR

documentType: tenderNotice

description:
Within the scope of the services, the EASO seeks to conclude a framework contract for the provision of the following services/supplies:
a) post-paid mobile voice and messaging services;
b) post-paid mobile data/Internet services;
c) supply of voice and data capable phones/smartphones/tablets and related accessories (headsets, USB connection cable, installation software, charger, etc.);
d) SIM cards and associated services and equipment for handling SIM cards;
e) provision of monthly telephone bills, call records and reports on the data/mobile Internet traffic and status of equipment acquisition;
f) 24/7 contract management support;
g) provision of ‘zero surprise’ subscription to fixed consumption limitation;
h) provision of mobile device management software to the subscriptions (potential).

awardCriteria: ratedCriteria

procurementMethod: open

mainProcurementCategory: services

European Asylum Support Office (EASO)

street: MTC Block A, Winemakers Wharf, Grand Harbour

countryName: MT

initiationType: tender


measure: smeBids

measure: foreignBidsFromEU

name: European Commission, Directorate-General for Economic and Financial Affairs, Treasury and Financial Operations Directorate

documentType: awardNotice

title: Provision of rating services

description: Provision of rating services.

title: Provision of rating services.

description: Provision of rating services.

awardCriteria: priceOnly

procurementMethod: direct

awardCriteriaDetails: PRICE: 100

street: rue Albert Wehrer — Office DRB B3/46, plateau de Kirchberg

countryName: LU

FITCH France SAS

street: 60 rue de Monceau

countryName: FR


title: GROS OEUVRE - VRD - ETANCHEITE

description: - Installation de chantier, études et plans d'exécution- Décapages et fouilles- Fondation de l'extension- Plancher bas- Superstructure- Auvent- Drainage- Préparation et revêtement des sols- Murets, trottoirs et bordures- Rampes d'accès, évacuation des EP, canalisations enterrées, fosses, regards, ancrage des luminaires- Etanchéité

title: CVC - PLOMBERIE

description: - Frais généraux (études et plans d'exécution, DOE, mesures acoustiques..)- Ventilation : dépose des équipements, CTA - bâtiment existant et bâtiment neuf, climatiseur réversible - bâtiment existant et bâtiment neuf, extracteurs et réseaux de ventilation- Chauffage : dépose des équipements, sous-station, radiateurs, réseau de chauffage...- Équipements sanitaires : dépose des équipements, robinets, laves-mains, lavabos, timbre d'office, vide-sceau, WC, bloc cuisine, sèche main- Eau chaude sanitaire : dépose des équipements, sous-station, réseau d'ECS- Eau froide sanitaire : dépose des équipements, alimentation générale EFS, réseau d'EFS- Évacuation des eaux : dépose des réseaux, réseaux eaux usées, réseau eaux vannes, réseaux eaux pluviales.

title: Electricité - CFA CFO

description: - Frais généraux : études et plans d'exécution, DOE..- Courant fort- Courant faible

title: Ravalement isolation Serrurerie

description: - Frais généraux (études et plans d'exécution, DOE...)- Traitement des façades- Serrurerie- Flocage ou projection

title: Menuiserie extérieures

description: - Frais généraux (études et plans d'exécution, DOE..)- Menuiseries extérieures- Occultations

title: peinture sols cloisons Faux plafonds

description: - Frais généraux (études et plans d'exécution, DOE, ...)- Cloisons- Sols- Peinture- Faux plafonds

title: Menuiseries intérieurs, paillasses et mobilier

description: - Frais généraux (études et plans d'exécution, DOE...)- Menuiseries intérieures- Paillasses, mobiliers

title: Aménagement d'une Maison de Santé Pluridisciplinaire à Nemours

description: 33 ; Bâtiment

mainProcurementCategory: works

procurementMethodDetails: OUVERT

CC DU PAYS DE NEMOURS

street: 41 Quai Victor Hugo


measure: electronicBids

name: European Commission, Eurostat, Directorate E "Sectoral and regional statistics"

title: Passenger mobility and road traffic

description:
The fundamental objective of this action is to support Eurostat and the MS in the development of EU statistics on passenger mobility and road traffic.
                  The total volume of the contract is estimated at approximately 360 person-days for the duration of 2 years.
                  The estimated total value is EUR 200 000 for the entire duration of the contract (24 months).

title: ‘Glossary for transport statistics’

description:
The objective of the project is to produce an updated, high quality 5th edition of the Eurostat/ITF/UNECE glossary for transport statistics in all EU languages in close cooperation with Eurostat and in the framework of the Intersecretariat Working Group on Transport also with UNECE and ITF.
                  The total volume of the contract is estimated at approximately 120 person-days for the duration of 18 months.
                  The estimated total value is EUR 60 000 for the entire duration of the contract (18 months).

title: Invitation to tender for the supply of statistical services: development work on establishing transport indicators to measure the specific policy targets for a sustainable and competitive transport

description:
This invitation to tender covers:
development work on establishing transport indicators to measure the specific policy targets for a sustainable and competitive transport.
The objective of this open call for tenders is to provide the Commission with support for the production of statistics on transport, covering in particular support for the development of statistics on passenger mobility and road traffic and the production of the 5th edition of the ‘Glossary for transport statistics‘.

street: Bâtiment Ariane 00/B063 Tri central — route d'Esch, 400

Sogeti Luxembourg SA

street: 36, route de Longwy

Artemis Information Management SA

street: 27 BOULEVARD PRINCE HENRI


currency: RON

title: 1. 1

title: CONTRACT DE FURNIZARE MICROBUZ+REMORCA

description:
Furnizare de :
1.  MICROBUZ Buc.1
2.  AUTOREMORCA     BuC.1

procurementMethod: limited

mainProcurementCategory: goods

procurementMethodDetails: Procedura simplificata

TEATRUL EXCELSIOR

countryName: Romania


title: Provision of Cleaning Services

description: Currently the ECB operates 3 office buildings, the Main Building in Frankfurt am Main, Ostend, with approx. 184 600 square metres of floor area, the Eurotower in downtown Frankfurt with approx. 59 900 square metres of floor area, the Japan Tower in downtown Frankfurt with 23 400 square metres of floor area. Besides these buildings, there is an external computer centre of approx. 3 000 square metres of floor area in Frankfurt, an office in Brussels of approx. 280 square metres of space and a residence in Frankfurt with approx. 220 square metres. The requirements might change over the contract duration. In order to meet the needs of the ECB, the required service must be of high quality. The contractor shall carry out the IFM cleaning services in a professional manner, using suitable personnel, in order to satisfy the hygiene and sanitation requirements of the units to be cleaned, ensuring that the same are well maintained. The IFM service shall include both a daily and a periodic cleaning service of the buildings, the cleaning of interior windows and glass surfaces, as well as the façade cleaning from the outside, outdoor cleaning and winter service at the ECB Main Building, and pest control at the ECB Main Building and the Eurotower according to the conditions which will be contained in detail in the invitation to tender and the detailed specification for cleaning services annexed to the ITT. All standard cleaning-related tasks are in principle to be performed as daytime cleaning, with the exception of only a few especially noise-intensive or disruptive tasks.

title: Provision of cleaning services.

description:
In the context of infrastructural facility management (IFM) the ECB aims to contract a supplier for the provision of high-quality cleaning services. The services encompass all of the ECB premises referred to in this tender, specifically areas, plants and facilities that require cleaning and maintenance in accordance with the room book and related land register. The approximate total gross floor area is 272 000 square metres. The buildings to be cleaned comprise offices, meeting rooms, technical rooms, staff restaurant, cafeterias, fitness centres, car parking spaces and common rooms such as copy rooms, storage rooms, toilets, and changing rooms. Among other tasks the following main services are required:
               — internal cleaning,
               — windows, façade and indoor glass cleaning,
               — outside cleaning,
               — winter service,
               — pest control,
               — housekeeping of 1 private residence,
               — façade cleaning of high-rise towers (optional).

procurementMethod: selective

European Central Bank

street: Sonnemannstrasse 22

countryName: DE

Gonder Facility Services GmbH

street: August-Schanz-Str. 18


name: European Commission, Directorate-General for Energy, Directorate D — Nuclear Energy, Safety and ITER

title: Framework supply contract regarding the supply of iCobra seals equipment and software.

description: The Directorate-General for Energy, Directorate E — Euratom Safeguards, is responsible for Euratom's nuclear material control activity in nuclear facilities. In the framework of these activities iCobra seals equipment and software are needed in order to preserve knowledge and guarantee the integrity of equipments and systems.

street: 1 rue Henri Schnadt, Zone d'activités Cloche d'Or

YFH, Inc. dba Aquila

street: 8401 Washington Place N.E.

countryName: US


description:
The European Central Bank (ECB) is seeking through this open procedure a supplier for the provision of services and works with regard to the audit of the TARGET2-Securities (T2S). The main deliverables of the Contract will be the annual audit of the T2S financial statements, the independent auditor’s report (opinion letter) and the report on internal controls (management letter). The services to be provided by the External Auditor shall be in accordance with the International Standards on Auditing (ISAs) and the IESBA Code of Ethics for Professional Accountants (formerly IFAC Code of Ethics).
                  The full details are available to all interested companies in the tender documentation available at the aforementioned website (see also section VI.3 "Additional Information").

title: Audit of the TARGET2-Securities (T2S) Financial Statements

description: The European Central Bank (ECB) is seeking through this open procedure a supplier for the provision of services and works with regard to the audit of the TARGET2-Securities (T2S) Financial Statements. The main deliverables of the Contract will be the annual audit of the T2S financial statements, the independent auditor’s report (opinion letter) and the report on internal controls (management letter). The services to be provided by the External Auditor shall be in accordance with the International Standards on Auditing (ISAs) and the IESBA Code of Ethics for Professional Accountants (formerly IFAC Code of Ethics).

Baker Tilly GmbH and Co KG

street: Friedrich-Ebert-Anlage 54


name: Conseil de l'Europe — Commission des marchés

title: Installation de tunnels de contrôle par rayons et de portiques détecteurs — solution de base: acquisition / solution variante: location.

description: Remplacement de l'ensemble des tunnels et portiques de contrôle aux entrées des bâtiments du Conseil de l'Europe à Strasbourg, Paris et Bruxelles.

street: BP 7

name: Les offres doivent impérativement être envoyées à l'adresse du courrier électronique ci-dessous et exclusivement celle-ci.


name: European Centre for Disease Prevention and Control


name: Conseil de l'Union européenne, General Secretariat

title: Fourniture de composants, de matériel et d'outillage électronique, multimédia et broadcast.

description:
Établissement de contrats-cadres avec remise en concurrence pour la fourniture de matériel électronique, multimédia, broadcast et d'outillage spécifique au sens le plus large, tel que:
               — composants électroniques,
               — connecteurs audio, vidéo et réseau,
               — câbles,
               — outillage technique,
               — outillage de test multimédia et broadcast,
               — consommables divers,
               ainsi que toute autre prestation et/ou fourniture en rapport avec les domaines techniques du contrat.

street: rue de la Loi 175

countryName: BE


name: INL, International Iberian Nanotechnology Laboratory

description:
Quantity: 1
                  General specifications:
                  — PVD module to be interfaced with a TIMARIS Singulus tool, connecting at one of the existing two ports of the transfer chamber.
                  — The module must be able to handle 200 mm wafers
                  — The base pressure must reach a pressure <=5E-8 mbar
                  — The module must be equipped with a turbo-pump and a water pump (or in alternative a cryopump).
                  Sputtering Specifications
                  1) The module must contain at least 4 operational deposition cathodes, all of them with the capability to deposit both conductive and insulating materials. The module should be modularly upgradable in the future, allowing the installation of additional identical cathodes up to a total of 12.
                  2) All cathodes must incorporate individual shutters than can effectively prevent cross-target contaminations and target contamination during ion milling.
                  3) The module must be capable of co-sputtering from 2 cathodes. The module should be modularly upgradable in the future, allowing the use of up to 4 cathodes in co-sputtering.
                  4) The target size should not exceed a diameter/length of 100 mm (4 inch).
                  5) The deposition must be made under an in-situ magnetic field strong enough to set a well-defined magnetic anisotropy over the whole wafer when depositing all magnetic materials and alloys based on Co, Fe and Ni.
                  6) The tool should be capable of depositing layers as thin as 0.1 nm and as thick as 2 um with reasonable deposition times (target 0.2 nm/s).
                  7) The 1-sigma thickness non-uniformity measured over a 200 mm wafer must be <=3 % with an edge exclusion <5 mm.
                  8) The wafer-to-wafer sputtering reproducibility must be demonstrated in a lot of 25 wafers. The absolute thickness variation across the total area of the 25 wafers cannot exceed 10 %. The tool reproducibility must be demonstrated for thin films (<5 nm) and thick films (>500 nm).
                  Ion Milling specifications:
                  1) The module must contain one Ion Beam Source.
                  2) The Ion Beam Source should be capable of etching Ta with a rate of at least 10 nm/min while keeping
                  the substrate temperature bellow 80 ºC, avoiding thermal and electrostatic damage to photo-resist masks defined on the wafers.
                  3) The 1-sigma thickness non-uniformity measured over a 200 mm wafer must be <=3 % with an edge exclusion <5 mm.
                  4) The ion beam source should be capable of operating in the above conditions for a wide range of ion energies: from low energy (< 150 eV) up to large energy (>1 000 eV)
                  5) The wafer-to-wafer sputtering reproducibility must be demonstrated in a lot of 25 wafers. The absolute etched thickness variation across the total area of the 25 wafers cannot exceed 10 %. The tool reproducibility must be demonstrated etching thin layers (<5 nm) and thick layers (>200 nm).
                  Compatibility with the existing TIMARIS Cluster:
                  1) The new module must be interconnected with the TIMARIS Cluster tool and be operated from the same user interface that controls the cluster.
                  2) The operation of the module should be integrated with the main tool, with the same user control, logging and recipe creation interfaces common to all modules installed in the cluster.
                  3) The cluster recipes must allow free movement of the wafer among all modules contained in the cluster, without limitations concerning the amount of transfers among chambers or the order by which they are executed.
                  Conditions for Facility Requirements
                  — Power 400 VAC: 3 phase, grounded
                  Product Safety
                  — CE Mark, interlocked safety cover, lock out/tag out disconnect and EMOS.

title: Cryo Ultramicrotome

description:
Quantity: 1
                  General specification
                  High stability mechanical drive system for specimen advance and cutting;
                  Cutting stroke from 0.1 mm to 15 mm
                  Numeric & digital displays of number of sections cut, total specimen feed advanced, section thickness, cutting speed and specimen feed remaining;
                  — Bright LED approach backlight with independent LED specimen transillumination/spotlight for specimen localization;
                  — Electronic stepping control for automatic specimen advance/return;
                  — Five memory channels to store frequently used cutting and trimming parameters;
                  — Built-in diagnostic and set-up routines;
                  — Built-in report generator and data base with specimen parameter recall mode;
                  — On-screen measurements of specimen and knife with built-in VIA digital micrometer system;
                  — Auto thin sectioning from 5 nm;
                  — Auto thick sectioning to 15 μm;
                  — 1 nm incremental steps for ultra, semi thin sectioning and block facing;
                  — Dual footswitch control for switch control for semi thin (or trim) and ultra-thin sectioning;
                  — Cutting speed range from 0.1 — 99.9 mm/sec in 0.1 mm/sec. increments with digital display;
                  — Mechanical advance with digital linear scale control;
                  — Specimen auto feed 200 microns;
                  — Variable return speed over entire cutting speed range;
                  — High-precision, manually operated knife stage with positive micrometer control of the N-S, E-W knife position;
                  — Stereomicroscope 7.7:1 zoom range, 6.5 x to 50 x magnification with 10 x WF (23 mm) eyepieces;
                  — Built-in ergonomic swivel away hand rest for restful section manipulation.
                  — Anti vibration table;
                  — Table-top 12 litre Dewar for 5 hours operation;
                  — Cryochamber heaters are individually controlled by adjusting heater power levels for particular applications;
                  — Workstation surrounds without touching the cryo chamber. Hands do not get cold and sectioning is not disturbed;
                  — Invar metal specimen arm for thermal stability for improved sectioning consistency;
                  — Video option can be added at any time and can be controlled by the PC;
                  Valued specifications:
                  — Power driven cutting stroke for the hardest specimen and largest block
                  — Scan and tilt Single control knob for quickly scanning the entire knife edge and sectioning area;
                  — Ergonomic stereomicroscope system with constant radial focus, eucentric tilt control adjustment;
                  — PC controlled cryo-ultramicrotome supplied complete with all in one, slim design computer, "Touch Screen" control monitor 21.5’
                  Knife Maker
                  — Compatible with commercial glass strips ranging from 6 to 8mm in thickness;
                  — Able to produce glass knives for cryo ultramicrotomy.

title: Ion Milling System for TEM samples

description:
Quantity: 1
                  General specifications
                  — Ion milling system for TEM samples with 2 guns;
                  — Gun angle can be adjusted within ± 10°, for each gun independently, even during the milling process;
                  — Sector milling over a range of 5° and 90°.
                  — Sector milling variation with increments of 0.1º
                  — 2 penning ion guns each independently adjustable gas control utilizing mass flow controllers to allow either rapid milling or slow precise ion polishing;
                  — Current in each gun can be adjusted within the range 0 to 100 µA;
                  — 10” colour touch screen with control software and ability to create and save recipes with the different milling parameters during a process;
                  — Current should be measurable for each gun independently and measured at the gun and not a on a Faraday cup located past the sample;
                  — Airlock for sample change with automatic shutter to avoid contamination of the viewing window. Sample is illuminated in reflection and transmission with adjustable intensity through the touch screen;
                  — The microscope is compatible with a digital camera;
                  — Oil-free vacuum system, with a two stage diaphragm backing a turbo drag pump with a minimum capacity of 80 l/s;
                  — Work chamber base pressure 5x10-6Torr and operating pressure 8x10-5Torr. Penning gauge shall monitor the chamber vacuum.
                  — XY stage for selecting the milling area;
                  — Cooling stage with electronic control of the temperature between -180°C up to 100°C;
                  — Dewar and conductor rod should share the main vacuum system.
                  — Built in Dewar heater
                  — 6-8 hour Dewar capacity
                  — Sample holder and guns must allow milling above and below sample at the same time;
                  — Sample size: 3 or 2.3 mm
                  Valued specifications
                  — Ion beam energy must have as a minimum 0.1 keV and maximum of 8.0 keV;
                  — Spot size less then 2 mm in diameter at any energy of the guns;
                  — Beam modulation: single gun, double gun or off.
                  — Through the inactive sectors when using beam modulation rotation speed should be 12 rpm;
                  — Power consumption during operation less than 200 W and 100 W with guns off;
                  Ultrasonic Disc Cutter
                  — Cuts simple holes, unique shapes or transmission electron microscope (TEM) discs from hard or brittle materials;
                  — Sample Size: <1 -10 mm;
                  — Sample Thickness: <0.04 — 5 mm;
                  — XY stage for centering the sample;
                  — Manual tuned frequency driver
                  Grinder System
                  — Produces parallel sided samples in the microns range
                  — Parallel sided discs of 50 µm thickness
                  — Specimen diameter.

description:
Quantity 1
                  Current Configuration
                  INL currently possesses and operates 4 tools dedicated to DRIE, RIE and PECVD:
                  Tool 1: SPTS system with Pegasus process module and LPX single wafer load-lock transfer system
                  Tool 2: SPTS system with ICP RIE process module and LPX single wafer load-lock transfer system
                  Tool 3: SPTS system with APS RIE process module and LPX single wafer load-lock transfer system
                  Tool 4: SPTS system with PRO2 PECVD process module and MPX 2-wafer load-lock transfer system
                  The 4 systems above are fully operational, sustained by all required support systems (vacuum pumps, chillers, thermal exchange units, etc.).
                  Required Upgrade Configuration
                  The current tender refers to
                  1. the acquisition of 1 additional, fully operational ICP process module with identical technical specifications to those of the current ICP process module at INL and
                  2. the acquisition of 2 25-wafer cassette transfer modules, including support systems such as vacuum pumps, chillers and/or other relevant parts and
                  3. clustering of the new and existing modules according to:
                  a. Adaption and installation of existing MPX transfer module (from tool 4) into process module of tool 1 (SPTS Pegasus)
                  b. Clustering of existing process moduli from tool 2 (ICP) and tool 4 (PECVD) into a single system using one of new 25-wafer cassette transfer modules.
                  c. Clustering of existing process modulus from tool 3 (APS) and new ICP process module (ICP) into a single system using one of new 25-wafer cassette transfer modules.
                  As a result of such arrangement, 3 obsolete LPX single-wafer transport modules will be available, which the tender awardee should take while taking into consideration their current market value for the proposed value / price of the overall installation and upgrade. The resulting 3 clusters (Pegasus with 2 wafer transport module, ICP plus PECVD with 25 wafers transport module, ICP plus APS with 25 wafers transport module) must be fully automated through appropriate control electronics and single software package (per cluster). INL may consider other proposed configurations — still the minimum required is (1) supply of one new ICP process module, (2) supply of two 25 wafer cassette transfer modules, (3) installation of existing MPX 2 wafer transport module into Pegasus process module, (4) clustering of all parts in 3 systems, (5) retake 3 LPX transport modules and (6) software control for ICP process module: Low pressure, high density plasma, module envelope containing all process control hardware, PC control unit, source/bias RF generator, bias matching unit, variable matching units, heated pendulum valve for closed-loop pressure control, electro-static chuck, PSU and He back-pressure control, heated lower chamber, lid and 1 m heated foreline, lower chamber shielding, filter endpoint system for inter-wafer cleans only, extracted gas box containing at least 8 MFCs (for processes focused on Al/TiW and SiO2 RIE), Temperature managed turbo pump, turbo bypass for module roughing, chamber capacitance manometers (0.1 and 1.0 torr), foreline mini-capacitance manometer and perfluoroelastomer seals. The system must be compliant with Fluorine based plasmas.
                  Transport modules (x 2 modules): enclosed vacuum chamber housing, single our double cassette handler, automatic pressure control system, wafer alignment as required for process, cassette and wafer presence detection, cross-slot checking and wafer slide-out, load-lock and transport mechanism from cassette to process modules, windows based control software integrated with software from process modules, capability of connecting up to at least 3 process modules, dry pump interface. Preferably, the 2 transport modules will be of the same kind and technical specifications. Vacuum pumps, compatible with current processes and gases, provided.
                  — Support systems: All required, adequate vacuum pumps, chillers, thermal exchange units and others must be included in the offer (suitable gas abatement and lines connections down.

title: Nano Imprint Lithography System

description:
Quantity: 1
                  Configuration
                  — Manual or automated 8-inch square full area thermal Nano Imprint Lithography system for R&D, allowing the possibility of conducting both thermal NIL (nanoimprint lithography) and hot embossing at temperatures up to 200°C.
                  — The system must include imprint and LED based UV modules (allowing the possibility of conducting both UV and thermal imprinting on the same platform), optical alignment system, equipped with technology allowing master to be replicated into a flexible polymer that in turn is used as a stamp when imprinting on the substrate (for improving master stamp lifetime as well as making it possible to imprint on curve substrates), computer controlled user interface (for control and analysis of the imprint process, log files and equipment diagnose), manual or automated loading system, water cooling unit and technology license grants from the bidder for limited volumes of commercial production and non-commercial R&D.
                  System Specifications
                  — Stamp Size: 200 200 mm (88 inch)
                  — Substrate Size: up to 200 200 mm (88 inch) (diameter/diagonal of round/square, possibility of processing substrates in the range of 10 mm to 200 mm)
                  — Stamp/Substrate: Thickness Standard thickness 2 mm
                  — Imprint Area (Maximum) 200200 mm (88 inch)
                  — Imprint Pressure (Minimum): 1 bar
                  — Imprint Pressure (Maximum): 50 bar
                  — Imprint Temperature (Minimum): Ambient temperature
                  — Imprint Temperature (Maximum): 200 ºC
                  — Imprint Temperature Setting Accuracy: +/- 2 deg
                  — LED based UV module integrated into the nano imprint lithography system: Type LED, service life time >10 000 hours, wavelength 365 ± 10 nm, UV light power at sample 20 — 24 mW / cm2, exposure area of 200 x 200 mm (8 x 8 inch), imprint max. Temperature 200 °C, imprint max. pressure < 50 bar, air cooling.
                  Optical alignment system: Dual camera optical alignment system for integrated use with the imprint system, X, Y, and theta, in which the alignment is performed on the same fixture that supports the substrate-stamp in the NIL system, overlay alignment accuracy of 10 % of alignment mark line width after compensation for design mismatch between stamp and substrate, max. alignment accuracy of ±1 μm or better, stamp and substrate materials such as quartz and silicon, stamp size from 2 to 8 inch Ø (circular), substrate size from 2 to 8 inch Ø (circular), alignment marks positioned at radius 22 mm or larger.
                  Physical Dimensions
                  — L x W x H: not larger than 150 cm x 150 cm x 190 cm, excluding auxiliary equipment (e.g. pumps, chillers, etc.)
                  — Weight: not larger than 1 200 kg, excluding auxiliary equipment (e.g. pumps, chillers, etc.)
                  Conditions for Facility Requirements
                  — Clean-room class: at least 100
                  — Room temperature range: 18 — 32ºC
                  — Relative Humidity: 40 — 65 %
                  — Power 400 VAC: 3 phase, grounded, pre-fused to 32 A, 50/60 Hz, 16 kVA
                  — Compressed Air: ca. 6 — 8 bar, 40 l / min
                  — Exhaust: ca. 1500 l / min
                  Product Safety
                  — CE Mark, interlocked safety cover, lock out/tag out disconnect and EMOS.

description: Contracts for the Supply and Installation of Nanofabrication and Microscopy Equipment and the Upgrades to Existing Nanofabrication Systems for the International Iberian Nanotechnology LaboratoryLot No. 1 — Nano Imprint Lithography SystemLot No. 2 — PVD module add-on to an existing multi-target PVD toolLot No. 3 — Upgrade of set of INL systems dedicated to Deep Reactive Ion Etching (DRIE), Reactive Ion Etching (RIE) and Plasma Enhanced Chemical Vapour Deposition (PECVD)Lot No. 4 — Ion Milling System for TEM samplesLot No. 5 — Cryo Ultramicrotome

street: Avenida Mestre José Veiga, s/n

countryName: PT

SPTS Technologies Ltd

countryName: UK

Obducat Technologies AB

countryName: SE


name: Council of the European Union, General Secretariat

title: UCA 17/029 Software maintenance, support and IT services for 4D.

description:
The purpose of this contract is to be contractually able to regularly upgrade our 4D environments in order to cope with technical evolutions and security reinforcement.
               It will also allow developers and operational team to have access to the 4D support specialists in order to have quick answers to development or operational issues.
               Last, this contract will cover IT services in the domain of 4D development which will allow the maintenance of the functionalities of the 4D applications and interfaces with the other applications in order to cope with the evolution of users' needs and evolution of the non-4D IT systems of the General Secretariat of the Council (GSC).

street: Wetstraat/rue de la Loi 175


name: European Economic Research Ltd (T/as Europe Economies)

name: European Commission, Directorate-General for Competition

title: Multiple framework contract for the provision of consultancy services on technical, economic and legal matters in the context of ICT and media competition cases.

description: The subject matter of the FWC is the provision by the contractor to the Commission of expert consultancy services on technical, economic and legal matters in the context of information and communications technology (ICT) and media competition cases (including antitrust, merger and state aid investigations and cases). The services may be required at any stage of the competition cases (e.g., during the investigative and assessment phase) or after the adoption of a Commission decision (e.g., before the European Union's courts or to monitor the application of a past decision).

street: MADO

Ecorys Nederland B.V.

countryName: NL


title: Media monitoring and analysis services for the European Parliament Information Office in Romania (EPIO Romania).

description: Media monitoring and analysis services for the European Parliament information office in Romania, both printed press and audiovisual.

European Parliament

street: Rue Wiertz 60

Media Image Monitor Srl

street: 63 Teodosie Rudeanu, Cam, 5, et.1, Sector 1, Bucharest, Romania

countryName: RO


title: soclage

title: Travaux d'aménagement pour l'exposition " Derain, Balthus, Giacometti " présentée au MAMVP du 2 juin (vernissage le 1er juin) au 29 octobre 2017.

description: 85 ; Décoration (travaux)

Etablissement public Paris Musées

street: 27, des petites écuries


name: European Innovation Council and SMEs Executive Agency (EISMEA)

title: Ceiling Increase of CHAFEA/2017/CP/03 Multiple Framework Contracts in Cascade to Provide Surveys on Consumer Related Issues – Wave 2, Lot 1: Survey on Consumers

description:
The objective of the framework contracts is to provide surveys on consumer related issues targeting consumers and retailers/providers of good and services.
               The call consists of the following 3 lots:
               — Lot 1: Survey on consumers — Wave 2, which will look at consumers' attitudes towards cross-border trade and consumer-related issues,
               — Lot 2: Survey on retailers — Wave 2, which will look at retailers/providers of services' attitudes towards cross-border trade and consumer-related issues; and,
               — Lot 3: Market Monitoring Survey — Wave 2, which will assess consumer experiences, opinions and perceived conditions in relation to the most important consumer markets.
               The surveys foreseen in the 3 lots defined above should in principle be conducted in all the EU member states, as well as in Iceland and Norway.

street: Place Charles Rogier 16


title: Furnizare de medicamente pentru sistemul nervos

description: acord – cadru de furnizare de medicamente pentru sistemul nervos în cadrul Programului na?ional de prevenire ?i asisten?a medicala, psihologica ?i sociala a consumatorilor de droguri 2015-2018, Subprogramul  V ,, Asistenta consumatoriilor de droguri prin centrele de prevenire, evaluare si consiliere antidrog”, necesare tratamentului beneficiarilor aflati în programele de asistenta CRPECA


title: Monitoring and related serivces in the context of the EU Platform for Action on Diet, Physical Activity and Health and the European Alcohol and Health Forum

description:
The following tasks are to be carried out during the contract period:
                  — keeping track of the status and duration of each commitment, making sure members present their individual monitoring reports and possible new commitments timely each year, receiving and checking their formal validity and format, preparing them to be uploaded in the database,
                  — extracting data and statistics and summarising the results of each round for report to the plenary and for meetings of DG Health and Food Safety with individual platform members,
                  — providing input (statistics) to the annual monitoring report,
                  — individual qualitative feedback to platform stakeholders on their individual reports to improve the quality of monitoring (and possible ways of improving the commitment itself),
                  — monitoring guidance (‘coaching’) and ‘ex post’ discussions of monitoring efforts to individual platform members,
                  — supporting the preparation of platform meetings by suggesting agenda points and preparing updates and analysis of the commitments (per type of action or other relevant breakdown agreed with the Commission services),
                  — drafting platform minutes and submitting them to DG Health and Food Safety within 1 week after the meeting (3 plenary meetings are planned for each calendar year),
                  — preparing and leading the discussions at the working group and advisory group meetings that aim to improve the monitoring and reporting of the platform,
                  — drafting working group and advisory group minutes and submitting them to DG Health and Food Safety within 1 week after the meeting (2 working group meetings are planned for each calendar year, the advisory group meets virtually on occasion of the reception of new commitments),
                  — producing ready-to-print annual monitoring reports covering the platform activities of the previous year (overview and analysis of commitments, overall platform analysis, conclusions, recommendations).

title: Monitoring and related services in the context of the EU platform for action on diet, physical activity and health and the European Alcohol and Health Forum.

description: This contract covers 2 parts: part I: the monitoring and related services of the EU platform for action on diet, physical activity and health (platform), covering the period 2016–2019; and part II: the monitoring and related services of the European Alcohol and Health Forum (EAHF), covering the period 2017–2019. Its objective is to ensure an independent analysis of their progress and to provide recommendations for their improvement. These fora have similarities with regards to commitment structure and database, annual monitoring and reporting requirements but also have specificities (see specifications).

ICF S.A.

street: 144-146 rue Royale


description: Provision of complete Travel Management Services to the Energy Community Secretariat.

title: Travel Management and related Services for the Energy Community Secretariat.

description: The successful tenderer will provide complete Travel Management Services to the Energy Community Secretariat.

Energy Community Secretariat

street: Am Hof 4 level 5


name: VTT Technical Research Centre of Finland

name: The European Joint Undertaking for ITER and the Development of Fusion Energy (‘Fusion for Energy’)

description: Scope of contract includes collection and analysis of functional requirements of ITER diagnostics divertor cassette remote handling connector (RHC); R&D, testing and development of preparatory and preliminary designs; and participation at ITER design review meetings which includes analysis and resolution of possible raised design issues (or chits).

title: Preparatory and preliminary design of ITER diagnostics divertor cassette remote handling connector and ancillary components.

description: Execution of required R&D, preparatory design and preliminary design based on selected design solution and system level design (SLD) of ITER diagnostics divertor cassette remote handling connector (RHC). The purpose of the RHC is to introduce a dismountable remote handling connection between the diagnostics divertor cassette cabling and the in-vessel cabling in the lower ports of the Tokamak.

street: C/ Josep Pla, 2, Torres Diagonal Litoral, Edificio B3, Office 10/26

countryName: ES

countryName: FI


title: Convention de vente d'abonnements annuels au personnel du Parlement européen à Strasbourg.

description: En vue d'aligner la politique de soutien à la mobilité et à l'usage des moyens de transport en commun au site de Strasbourg, le PE a décidé de mettre en pratique une convention de subvention des abonnements pour son personnel qui y est affecté. Cette convention vise à inciter le personnel sur place à utiliser de manière constante les moyens de transport en commun sur le territoire de la ville de Strasbourg.

Parlement européen

street: 1 avenue du Président Robert Schuman

Compagnie des transports strasbourgeois

street: 14 rue de la Gare aux marchandises - CS 15002


name: Eurofound — European Foundation for the Improvement of Living and Working Conditions


name: Cedefop — European Centre for the Development of Vocational Training

title: Validation of Non-formal and Informal Learning and Career Guidance

description:
The estimated budget for the required services described in this call for tenders is of the order of 200,000 Euro (without VAT).
                  In the case where unforeseen circumstances result in the global value of this contract being consumed faster than originally planned, Cedefop reserves the right to consider conducting a "Negotiated procedure without prior publication of a contract notice" with the existing contractor(s) in order to increase the maximum amount stated above by up to 50 % (Art. 134(e) of the Rules of Application (RAP) implementing the EU Financial Regulation (FR).

description: The study will investigate the necessary conditions, synergies and efficiency gains of linking validation and career guidance and counselling services.

street: 123, Europe St. — PO Box 22427

countryName: GR

3s Unternehmensberatung GmbH

street: Wiedner Hauptstrasse 18


name: Commission européenne, pour l'Office européen de sélection du personnel (EPSO)/École européenne d'administration (EUSA), la direction générale des ressources humaines et de la sécurité, unité HR.DDG.R.1

title: Services de consultance ayant trait aux techniques d'examen et de sélection utilisées dans le cadre de la procédure de «certification».

description:
Le présent marché concerne la prestation de services de consultance en techniques d'examen et de sélection utilisées dans le cadre de la procédure de «certification» en partenariat avec l'EPSO et l'École.
               Ces services incluent aussi l'animation de séances de formation des membres du Comité de délibération aux techniques dont ils auront besoin pour l'évaluation des candidats.


title: TRAVAUX DE REALISATION D'UN SEUIL FIXE AU DROIT DU TUNNEL DE DELESTAGE DU PONT DE LA CLUE SUR L'EYGOUTIER

description: 118 ; Etude

awardCriteriaDetails:
Prix: 50
Valeur technique de l'offre appréciée selon le mémoire justificatif: 40
Le critère délai sera apprécié à partir de la présentation du phasage des travaux proposé et justification de la cohérence avec le planning prévisionnel d'exécution intégré dans le CCTP au chapitre 2.1. Le phasage des travaux devra préciser les différentes étapes des travaux, les cadences attendues, et justifier de son adéquation avec les objectifs et les contraintes du marché en termes de délai global maximal du chantier: 10

Ville de La Garde

street: Siège social : Hôtel de Ville BP 121


title: Prestations de reportages photographiques

description: 463 ; Numérisation


name: Conseil de l'Union européenne, secrétariat général

title: Maintenance des installations techniques d'audio-interprétation, multimédias et broadcast, ainsi que de leurs systèmes de contrôle et commande («lot 8») du bâtiment Europa.

description: Maintenance préventive et corrective des équipements et des installations d'audio-interprétation, multimédias et broadcast du projet Europa, ainsi que de leurs systèmes de contrôle et commande, correspondant aux salles de réunion et espaces techniques du bâtiment.

street: Rue de la Loi 175

name: unité de coordination des acquisitions, bureau JL 1070 KL 77


title: 2. Cartuse si tonere compatibile

description: Cartuse si tonere originale pentru fotocopiatoare si imprimante

title: 1. Cartuse si tonere originale

title: Cartuse si tonere pentru imprimante si fotocopiatoare

description: In baza contractelor ce se doresc a fi atribuit se va asigura furnizarea produselor precizate in Caietele de sarcini


name: Union européenne - Mission permanente de l’Union européenne auprès de l'OMC à Genève

currency: CHF

title: Services de sécurité pour la Mission de l’UE auprès de l'OMC à Genève, la Délégation de l'UE auprès de l'ONUG à Genève et la Délégation de l'UE pour la Suisse et Liechtenstein à Berne

description: Les activités de la mission/délégation de l'UE en Suisse (Genève et Berne) doivent être sécurisées par des moyens humains et matériels nécessaires, incluant de manière non exhaustive: le contrôle de l'accès des visiteurs aux bâtiments occupés par la mission et la délégation et par son personnel; la surveillance générale de ces bâtiments en vue d'éviter toute intrusion; la permanence téléphonique; la surveillance complémentaire des bureaux ou des résidences des agents expatriés si un besoin ponctuel se manifeste; l'assistance aux personnes en danger; l'installation, l'entretien et la désinstallation de dispositifs d'alarme et de sécurité dans les logements du personnel expatrié; le raccordement de tous les dispositifs d'alarme et de sécurité des bureaux et logements à une centrale de surveillance, ainsi que la mise à disposition d'une patrouille mobile et d'intervention (PMI) en cas d'accident ou d'incident; la formation prévention incendie et premiers secours; l'exercice annuel d'évacuation.

street: Rue du Grand-Pré 66

postalCode: 1211 Genève 7

countryName: CH

Protectas SA

street: rue de Genève 70


name: Getronics Belgium (chef de groupement) avec Close S.A.

title: Travaux de câblage pour les réseaux de télécommunication et de réalisation de salles spécialisées.

description:
Exécution de travaux de câblage et de réalisation de salles spécialisées pour les besoins en télécommunication.
— Câblage structuré (data/téléphonie): projets et TEX (travaux de câblage au niveau du réseau data/téléphonie de petite envergure en général jusqu'à maximum 50 points).
— Aménagement locaux sensibles (HVAC/électricité): projet et TAS (travaux d'aménagement au niveau des locaux sensibles — salles informatiques, centraux téléphoniques, etc., en général inférieurs à 20 000 EUR).

street: De Kleetlaan 12B

Distecable SL

street: Avenida de las Mestas, 7 Bajo

SIMAC ICT Belgium

street: Arthur De Coninckstraat 5


title: Pilot project: Analysis of the best ways for producer organisations (POs) to be formed, carry out their activities and be supported

description: Pilot project: ‘Analysis of the best ways for producer organisations (POs) to be formed, carry out their activities and be supported’.

European Commission

street: rue de la Loi /Wetstraat 130 Office: L-130 10/037

Ernst and Young Advisory

street: 1-2, place des Saisons


title: China energy project support.

description: The EIB seeks to appoint an appropriately experienced, staffed and skilled service provider for external support to its operations in China. Specifically, the EIB will need the assistance of a service provider for support with due diligence and monitoring activities.

European Investment Bank

street: 98-100, boulevard Konrad Adenauer

Rina Consulting S.p.A.

countryName: IT


title: Travel tracking and assistance

description:
The ECB is seeking for a contractor who will provide a travel tracker system for all ECB business travelers. The ECB has approximately 2 700 business travelers with more than 35 000 transactions per year and around 10 expats holding a position outside Germany.
                  The purpose of the travel tracking is to locate all ECB business travelers worldwide and to establish contact with them in the event of emergencies. The following requirements apply:
                  — The individual travel data must be transferred automatically from the different booking systems (at least from the current global distribution systems (GDS) "Amadeus", "Sabre" etc.).
                  — It should also be possible to manually add other business-relevant locations (buildings, partner locations and offline booked hotels).
                  — For the ECB staff managing the tool this data must be accessible as quickly as possible within the travel tracking system in order to determine the location of the business traveler.
                  — In addition, travel tracking must contain relevant travel warnings and alerts as well as copious country information.
                  — The travel warnings should contain medical and security-relevant warnings of the destinations and are sent to the traveler as well as the competent staff. Various risk classifications are to be taken into account.
                  — Country information and travel warnings should, if possible, be available via a corresponding mobile application for the most common operating systems.
                  — Travelers must have the possibility to voluntarily allow managing staff to use the traveler's mobile device location services to pinpoint the traveler location if requested.
                  — An assistance center must deliver support to the traveler in the event of a medical emergency, security incident or unexpected travel problem.
                  — Via an easy-to-use communication system it should be possible for managing staff to establish contact to the traveler by means of bulk messages (SMS, email, voice).
                  — The tenderer should have experience in delivering end-user training both for competent staff managing the tracking tool and for travelers.

title: Handling of travel expenses

description:
The ECB is seeking a contractor who will operate the handling of travel expenses under its own responsibility and according to set standards and service levels. The contractor shall in particular provide the operational staff, the supervision, the management skills and the resources to ensure that the service is delivered in accordance with the ECB requirements. The ECB will not provide any personnel for the performance of the service which shall be exclusively delivered by the contractor's own staff. The travel expense handling services shall be provided at the ECB premises in Frankfurt am Main. The ECB will provide the logistics, office facilities, telephone infrastructure, IT hardware and software, power, lighting, heating and furniture required enabling the contractor’s staff to deliver the services.
                  The implant solution shall be able to handle approximately 17 000 travel expense claims per year, which are manually validated against the SAP system and receipts scanned. It shall further be able to handle approximately 3 300 general expense claims, respective receipts are to be scanned. Currently these services are provided by a staff of 3, most with an accounting background.

title: Provision of travel services

description:
Travel services include offline and online bookings for Air, Rail, Car Rental and Hotels based on a transaction fee model and a specific online booking engine (Cytric). The tenderer should be working with a Global distribution system (GDS). The online booking engine (OBE) might be subject to change in course of the contractual period. For the offline bookings, the tenderer shall provide a dedicated team dealing solely with ECB related requests. The services provided should be aligned to the travel rules of the ECB. The contractor might also be requested to take care of air and hotel bookings for groups exceeding 10 travelers.
                  The past travel volume of the ECB has been as follows: The ECB has approximately 2 700 travelers in Frankfurt am Main and over 35 000 transactions are booked each year. Travel spend is estimated at approximately over EUR 15 000 000 annually. About 89 % of air travel is to main European cities, e.g. London, Madrid, Amsterdam, Rome and Brussels. Intercontinental destinations amount to 8 %, leaving 3 % of business within Germany. About 48 % of the total business travel transactions were by Air, Rail accounted for 25 % and Hotels 26 %. Approximately 14 % of travel is booked online via the Online booking engine Cytric and 80 % offline via the Travel services provider, at present. An increase of online bookings is envisaged.

title: Provision of Travel Services

description: It is the intention of the ECB to award contracts for the provision of travel services (lot 1), handling of travel expenses (lot 2) and travel tracking and assistance (lot 3). The contracts are envisaged to start on 1.1.2018 and shall remain in force for a period of 3 years. The ECB may request an extension, but the total duration of the contracts shall not exceed 4 years. The main language of service delivery will be English. The requested services will be divided into 3 lots. Tenderers may apply for 1, 2 or all 3 lots.

European Central Bank

street: Sonnemannstrasse 22


name: European Commission, Consumers, Health, Agriculture and Food Executive Agency (Chafea)

title: Call for tenders Chafea/2016/Health/06 — single framework contract to provide services to support the assessment of characterising flavours in tobacco products.

description: The main purpose of the single framework contract to be concluded as a result of the present procurement procedure is to support the specification of the methodology for sensory analyses and to set up the ‘Technical group’ which will assist the ‘Independent advisory panel’ and, ultimately, the European Commission and Member States in the implementation of legislation and policies in the area of tobacco and related products, in particular in relation to the provisions regarding the prohibition of products with characterising flavours foreseen in Article 7 of the Tobacco Products Directive.


name: European Centre for Disease Prevention and Control

title: Interim services.

description:
ECDC wishes to conclude a single framework contract in order to use interim services in line with the competency profiles listed in the tender specifications.
ECDC may need interim staff as a complement to its statutory staff or to temporarily replace staff.
Services needed can either be in the administrative/technical area (lot 1) or scientific area (lot 2).

street: Granits väg 8


name: European Commission, Directorate-General for Competition, Directorate D, Unit D5

title: State aid assessment of impaired assets: valuation and resolution mechanisms.

description:
Several Member States supported some banks by providing relief for impaired assets. The Commission released in 2009 a communication paper on the ‘Treatment of impaired assets in the Community banking sector’. It assumes that the design of asset relief measures is primarily the responsibility of the Member State concerned, but their assessment under the state aid rules is the Commission's responsibility. For the assessment of valuation methods put forward by Member States for asset relief measures and their implementation in individual cases, the Commission could consult panels of valuation experts.
The Commission may also consult experts on the way to resolve problematic assets and associated liabilities envisaged by a Member State. Experts may be consulted on specific or general issues related to the compliance of the envisaged resolution mechanism with the conditions for finding aid compatible. These assessments will be done in the new SRM and BRRD's legislative context.


name: Société momentanée Rinaldi — Endeco — TDGI

name: SA TDGI — Tecnologia de Gestão de Imóveis

title: Contrat-cadre de services d'entretien et de maintenance des biens de second œuvre des bâtiments du Parlement européen à Bruxelles.

description: Marché de services d'entretien et de maintenance des biens de second œuvre des bâtiments du Parlement européen à Bruxelles dans les domaines techniques suivants: menuiseries bois, ouvrages intérieurs et revêtements.

Parlement européen

street: Rue Wiertz 60

street: rue de l'Industrie

SA TDGI

street: avenue J. Monnet

street: Lagoas Park, Edificio Um

Rinaldi SA

street: Rue de Flémalle-Grande 33-35

Endeco S.A.

street: rue de l'Industrie 6


name: Publications Office of the European Union


description:
Le présent marché a pour but la réalisation de travaux d'extension de la crèche Wayenberg du Parlement européen à Bruxelles.
                  L'extension prévue sera développée sur 4 niveaux hors sol et 2 niveaux en sous-sol, pour une surface totale brute d'environ 3 000 m2.

title: Appel d’offres nº 06D20/2017/M007 — travaux d’extension de la crèche Wayenberg du Parlement européen à Bruxelles

Bouygues Bâtiment NE ES EN

street: 1 avenue de l’Horizon


name: Technopolis Consulting Group Belgium Sprl

name: Zentrum für Europäische Wirtschaftsforschung GmbH (ZEW) Mannheim

name: The Centre for Strategy & Evaluation Services LLP (CSES)

name: IDEA Strategische Economische Consulting

name: Österreichisches Institut für Wirtschaftsforschung (WIFO)

name: Sociedade Portuguesa de Inovação Consultadoria Empresarial e Fomento da Inovação — S.A. (SPI)

name: The Joint Institute for Innovation Policy (JIIP)

name: Ernst & Young Special Business Services CVBA/SCaRL

name: The Lisbon Council for Economic Competitiveness and Social Renewal ASBL

name: Centre for European Policy Studies (CEPS) AISBL

name: PricewaterhouseCoopers EU Services EESV (PwC EU Services EESV)

name: Consultores de Automatización y Robótica, S.A. (CARSA)

name: The Executive Agency for Small and Medium-sized Enterprises (EASME)

title: Multiple framework contract with reopening of competition to provide economic analysis in support of SME policy.

description:
A multiple framework contract with reopening of competition to provide economic analysis in support of small and middle-sized enterprises' policy. A multiple framework contract with reopening of competition will be concluded with a maximum of 5 selected tenderers.
               The objective of this call for tenders is to provide EASME with a flexible tool (i.e. the FWC), to request specific and timely economic analysis in support of SME policy. In this regard, the call for tender aims at selecting contractors capable of providing expert capacity that will be used, on demand, by means of specific service requests. As far as the work is concerned, it will mainly consist of studies and analyses to assess the impact of policy measures on the competitiveness of European enterprises and industry sectors, and the extent to which the measures proposed are technically and economically feasible and the most cost effective.

street: Covent Garden 2, Place Rogier 16, Office 12/27

Copenhagen Business School

countryName: DK

street: Jozef II straat 40 box 1,

countryName: AT

Old-Continent Sprl

street: Rue du Collège 27

street: Place du Congrès 1

DIW Econ GMBH

street: Mohrenstrasse 58

LE Europe Limited

street: Indecon House, 4 Fitzwilliam Place

countryName: IE


description: The overall objective of the tender is to provide EMSA with the necessary interim personnel in a timely manner and in line with the job profiles requested.

title: Provision of interim services for European Monitoring Centre for Drugs and Drug Addiction (EMCDDA)

description: The overall objective of the tender is to provide EMCDDA with the necessary interim personnel in a timely manner and in line with the job profiles requested.

title: Provision of interim services for European Maritime Safety Agency (EMSA) and the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA).

description: The overall objective of the tender is to provide EMSA (lot 1) and EMCDDA (lot 2) with the necessary interim personnel in a timely manner and in line with the job profiles requested.

European Maritime Safety Agency

street: Praça Europa 4


name: Studiengesellschaft fuer den Kombinierten Verkehr e.V. (SGKV)

title: Further development of a European Rail Locations

description:
The objective of the portal is 2-fold:
                  — Constitute an efficient and user-friendly market tool providing all the necessary information on rail facilities, in particular rail freight facilities, e.g. for the planning of rail services.
                  — Help the service facilities operators to comply with their obligations under the Recast Directive (Directive 2012/34/EU) and the Implementing Regulation, including the ability to indicate whether or not their facility has capacity available, on a live dynamic basis.
                  — Provide a reporting capability in order to allow monitoring of the number and type of service facilities and their attributes the technical specifications include the following tasks:
                  — Fine-tuning strategies for:
                  − Governance for the ongoing management of the portal.
                  − Business Model to make the portal self-sufficient in future.
                  − Data collection and management.
                  — Further developing the functionality of the portal taking into account the forthcoming implementing regulation, and developing necessary interfaces with service facility operators or other relevant entities for entering their data.
                  — Updating the existing data and sourcing a critical mass of the remaining data, in particular data on freight facilities, from third parties. Adding it to the portal so that the portal becomes the “European tool of choice” for:
                  − individual service facility operators, infrastructure managers or other relevant entities for publishing information required by the Implementing Regulation,
                  − remaining entities operating facilities to publish their information for marketing purposes, even if not required by law, and
                  − potential users to access information about rail freight facilities in Europe.
                  — Launching a production version of the portal that will be available to the public and handing it over to the System Manager.

description:
To develop a EU-wide web-based Rail Locations Portal with GIS functionalities, capable of presenting relevant data for different kinds of last-mile infrastructure in a transparent way, The portal should become the tool of choice:
               (a) that potential rail stakeholders use to access information about rail facilities in Europe; and
               (b) that could assist operators of rail service facilities (freight as well as passenger rail service facilities) to comply with their information provision obligations as foreseen in Commission Implementing Regulation (EU) 2017/2177 of 22.11.2017 on access to service facilities and rail-related services.

street: Westhafenstrasse 1


description:
The objective of this contract is the maintenance and further development of the PPP database and its associated tools which are used for the calculation and aggregation of the PPPs for 37 countries participating in the PPP programme including the provision of a help desk to users of the PPP tools.
                  The total volume of the work for the entire contract period is estimated to cover around 1,15 person-years (i.e. the total volume is around 4,6 person-years).

title: Maintenance and development of the PPP database and related tools.

European Commission, Eurostat

street: Bâtiment Ariane 00/B063 Tri central — Route D'Esch 400

countryName: LU

Agilis SA Statistics & Informatics

street: Patriarchou Ioakim 1 and Pireos 209


name: Lexis Nexis Business Information Solutions B.V.

name: European Parliament, European Parliamentary Research Service

title: Subscription to NEXIS only Dutch news.

description: Lexis Nexis is a database (access to newspapers, weeklies and press agencies in Dutch).

street: rue Wiertz 60

street: Radarweg 29


name: Europäische Kommission, Joint Research Centre (JRC), Karlsruhe

title: Mechanische Fertigungs- und Montagearbeiten für wissenschaftliche Geräte und Apparaturen.

description: Geplant ist die Vergabe von mechanischen Fertigungs- und Montagearbeiten. Das Angebot umfasst die Ausführung von Fertigungs- und Montagearbeiten für wissenschaftliche Geräte und Apparaturen.

street: PO Box 2340

countryName: DE

MHC Anlagentechnik GmbH

street: Germersheim


name: Croatian Institute of Public Health (HZJZ)

title: Support to National Dietary Surveys in Compliance with the EU Menu Methodology (7th Support). “The Adults’ Survey”, Including Subjects from 10 to 74 Years Old

description:
Type of contract: direct contract.
                  Duration of tasks in direct contracts: max 54 months after the entry into force of the contract.
                  Budget information: The upper limit of 165 000 EUR constitutes the maximum and any offer exceeding this maximum will not be retained for contract award.
                  EFSA will award as many individual contracts as possible within the budget of 225 000 EUR, which EFSA has available for supporting national dietary surveys in compliance with the EFSA EU menu methodology.
                  There is also a possibility that the overall EFSA budget available for supporting national dietary surveys in compliance with the EFSA EU menu methodology will be increased in 2017/2018. In such case, at the moment of the award, any additional funds may be awarded to tenderers according to the ranking resulting from application of the best value for money formula.

title: Support to National Dietary Surveys in Compliance with the EU Menu methodology (7th Support). “The Adults’ Survey”, Including Subjects from 10 to 74 Years Old

description: The aim of this procurement procedure is to award direct service contracts to organisations from EU Member States, Albania, Bosnia and Herzegovina, the former Yugoslav Republic of Macedonia, Iceland, Liechtenstein, Montenegro, Norway, Serbia and Switzerland, which have a governmental mandate to carry out a dietary survey at national level in the period from 2017 to 2022 or 2018 to 2023 and a national dietary survey has not been funded as part of the EU menu process or carried out within the country in the last 5 years for the planned target group (considering as reference date the beginning of the field work). Under the resulting contract(s) the contractor(s) should either adapt or develop the methodology to be used in these surveys according to the EFSA guidance on the EU menu methodology. The dietary data collected through the contracts should be available for EFSA's scientific activities without restrictions on its use.

European Food Safety Authority (EFSA)

street: Via Carlo Magno 1A

street: Rockfeller Street 7

countryName: HR


title: Maler- und Bodenbeschichtungsarbeiten sowie Instandhaltungsarbeiten der Stillstandszeit.

description:
Das Angebot umfasst Anstrich- und Bodenbeschichtungsarbeiten im Institutsgebäude entsprechend der vorliegenden Spezifikation. Das Angebot ist in 2 Lose unterteilt:
               Los 1: Maler- und Bodenbeschichtungsarbeiten;
               Los 2: Instandhaltungsarbeiten der Stillstandszeit.

street: Postfach 2340

Bauschutz GmbH & Co. KG

street: Neckarstrasse 2


name: European Commission, Directorate-General for Education, Youth, Sport and Culture, Directorate C — Innovation, International Cooperation and Sport

title: Study in Europe: enhancing the attractiveness of European higher education.

description: To make information on study and research opportunities in European programme countries more visible and accessible through a range of products, services and events.

awardCriteriaDetails:
Quality: 80
Price: 20

street: rue Joseph II 70

countryName: BE

Campus France

street: 28 rue de la Grange-aux-Belles

countryName: FR


title: Avenant no 1 au contrat CNT(2013)173

description: Signature d'un avenant au contrat CNT(2013)173, afin d'étendre les prestations aux bâtiments MHE (Maison de l'histoire européenne), WIM (Wilfried Martens) et BMT (Belmont Court), et certaines modifications des spécifications techniques.

title: Procédure négociée no 06A50/2016/M009 — Avenant no 1 au contrat CNT(2013)173 — Collecte, transport, recyclage et/ou traitement des déchets, nettoyage des locaux, des vitrages et autres services d'hygiène.

description: Nettoyage des bâtiments MHE (Maison de l'histoire européenne), WIM (Wilfried Martens) et BMT (Belmont Court), qui sont entrés dans le parc immobilier de l'institution après l'entrée en vigueur du contrat de base.

Parlement européen

street: Rue Wiertz 60

GOM S.A.

street: Noorderplaats 7/1


name: Agriconsulting Europe SA (AESA) as Leader of the Joint Tender

name: Consumers, Health, Agriculture and Food Executive Agency

description: Implementation of training activities.

title: Training activities on Union information management systems for official controls in sanitary and phytosanitary fields under the “Better training for safer food” initiative

description: During the first phase, 12 training sessions in total with a total number of 360 supported participants for the whole training programme shall be organised and 100 working days of sustained training sessions. The same training programme must be implemented during the second phase of the contract.

street: Bâtiment Ariane; Route d'Esch 400

street: Avenue de Tervuren 36B


name: Europese Commissie, Gemeenschappelijk Centrum voor onderzoek, directoraat Resources, Resource Management Unit — Petten

title: Direct leveringscontract voor het vervangen van de ketelinstallatie ten behoeve van de „Fuel Cell”-faciliteiten en montagezaal in gebouw 310 van het JRC in Petten.

description: De huidige ketelinstallatie gelinkt aan de „Fuel Cell”-faciliteiten en montagezaal in gebouw 310 dateert van 1992. Deze installatie heeft haar maximale levensduur bereikt, is oud en er zijn geen onderdelen meer voor beschikbaar. Daarnaast loopt de energie-efficiëntie ver achter op de huidige energie-eisen. Om deze redenen dient de bestaande ketelinstallatie te worden vervangen. De ketelinstallatie dient te worden geleverd en geïnstalleerd. De ruimte dient hiervoor te worden voorbereid (sloop van huidige installatie) en de nieuwe installatie moet worden aangesloten op de onderliggende infrastructuur.

street: Postbus 2

name: L. Vuskovic, Resource Management Unit — Petten

Wilms Den Helder BV

street: Ravelijncenter 39


name: European Centre for Disease Prevention and Control

title: Facility management consultancy services.

description:
ECDC seeks to procure facility management consultancy services during the design, fit-out, removal and operations phases of the ECDC premises.
The foreseen activities are related to the design, project management and supervision of the interior fit-out of the ECDC office space.
Other activities include strategic facility management and expert advice on technical matters on the operation of the ECDC office space.

street: Granits väg 8


name: État du Grand-Duché de Luxembourg — Ministère du développement durable et des infrastructures — Administration des bâtiments publics

title: Conduite et maintenance des installations techniques des bâtiments de la Cour de justice de l’Union européenne

description:
Conduite, surveillance, entretien courant ainsi que garantie totale des installations techniques des bâtiments:
                  — opérations de maintenance préventive (systématique et conditionnelle),
                  — opérations de maintenance corrective dont la valeur des pièces de remplacement est inférieure à 500 EUR HT,
                  — opérations de garantie totale (opérations dont la valeur des pièces de remplacement est supérieure à 500 EUR HT),
                  — prestations de conduite, de gestion environnementale et énergétique,
                  — contrôles périodiques obligatoires.
                  Prestations supplémentaires ne s'apparentant pas à des interventions couvertes forfaitairement.
                  Les installations sont classées en 11 domaines techniques:
                  1. HVAC;
                  2. électricité;
                  3. régulation et GTC;
                  4. protection et sécurité incendie;
                  5. sûreté, contrôle d'accès, intrusion et vidéosurveillance;
                  6. sanitaires et plomberie;
                  7. équipements électromécaniques;
                  8. équipements de cuisine;
                  9. engins de levage;
                  10. transport automatique de documents;
                  11. architecture technique.

title: Conduite et maintenance des installations techniques des bâtiments de la Cour de justice de l'Union européenne.

description: Conduite, surveillance, entretien courant ainsi que garantie totale des installations techniques des bâtiments: prestations supplémentaires ne s’apparentant pas à des interventions couvertes forfaitairement.

name: Cour de justice de l'Union européenne — Section «Facility Management»

name: État du Grand-Duché de Luxembourg, ministère du développement durable et des infrastructures, administration des bâtiments publics

name: Cour de justice de l'Union européenne — section «Facility Management»

Cour de justice de l'Union européenne

street: rue du Fort Niedergrünewald


title: Promoting Online Training Opportunities for the Workforce in Europe

description:
EASME wishes to enter into a service contract for promoting online training opportunities for the workforce in Europe.
                  The goal is to benchmark public policies and stakeholders’ initiatives with a view to promote successful approaches to deliver new skills related to high technologies based on online education and training tools, and to foster the uptake of best practices.
                  The target groups are professionals, managers, leaders and entrepreneurs in SMEs (including start-ups and scale-ups) in all sectors that would benefit from online training to acquire and/or update their skills.

title: Promoting online training opportunities for the workforce in Europe.

street: Covent Garden 2, Place Charles Rogier 16, Office 12/012

PwC EU Services EESV

street: Woluwe Garden, Woluwedal 18


title: Annual subscriptions to electronic resources.

description:
The main purpose of the framework contract is the purchase of annual subscriptions to electronic resources through a single supplier. The services required include also a discovery service (summon discovery) to support a simultaneous search through all or most of these electronic resources and a single log-in solution (OpenAthens) for all the electronic resources enabling the access to the resources while at home or travelling.
The services aim at retrieving information for the use of scientific research, monitoring developments in the policy field at EU and national level in EU countries and citations of Cedefop publications. Access should be granted to the main office in Thessaloniki (Greece), to our office in Brussels and also remotely, for home access or travelling staff.

Cedefop

street: 123 Europe Street, PO Box 22427

LM Tietopalvelut Oy Sucursal en España

street: Fluviá 97, 1-4


title: Pilot STI sentinel surveillance project.

description: The overall aim of this project is to investigate the feasibility of sentinel surveillance for sexually transmitted infections in the European Union, aiming to collect comparable, high-quality STI data through a pilot in selected cities in EU/EEA Member States.


name: Cigna Life Insurance Company of Europe NV

title: Medical assistance and repatriation for members of personnel and dependants

description: The service consists in medical guidance, medical assistance and organisation of repatriation in all situations, excluding for a member of personnel and/or their dependants who is on a mission for the EIB Group.

title: Natural causes death benefits

description: As part of its collective insurance agreement, the EIB Group wishes to offer its members of personnel natural causes death benefits. Death as the result of suicide must also be covered.

title: Insurance of Medical Costs in the case of Occupational Disease and Accident; Accidental Death and Disability lump sums in the case of Death and Disability resulting from an Accident or an Occupational Disease

description:
— Insurance of medical costs in the case of occupational disease for members of personnel, and in the case of accident for members of personnel and dependents,
                  — Accidental death and disability lump sums in the case of death and disability resulting from an accident or an occupational disease for members of personnel.

title: Human Resources Insurances and Medical Assistance for the EIB Group

description: The EIB Group (European Investment Bank and European Investment Fund) aims at selecting service providers to provide on the one hand group insurance coverage in a number of risk categories on behalf of the EIB Group's members of personnel and on the other hand medical assistance and repatriation for members of personnel and dependants.

European Investment Bank

street: 98-100, boulevard Konrad Adenauer


title: Provision of services to ECDC for coordination and organisation of the Escaide scientific conference.


title: Consultancy services for building and facilities management services.

description:
The scope of this procurement procedure is the provision of consultancy services and expert advice in the following areas:
               housing management services:
               a) technical and architectural advice during the different stages of a housing project;
               b) advice on all aspects of change management;
               c) advice on all aspects of housing and real estate and contract management services:
               — building maintenance services,
               — facilities management services,
               — project management services to support in the running of building and housing projects.

Europol

street: Eisenhowerlaan 73

DVTadvies BV

street: Savannahweg 25b


name: Deloitte and Agile Partner (Deloitte Tax and Consulting and Agile Partner)

name: Consortium Atos — EY (Atos Luxembourg PSF SA and Ernst and Young Advisory)

name: European Parliament, Directorate-General for Innovation and Technological Support (ITEC)

title: External provision of enterprise architecture, methodology, quality assurance and audit.

description: This call for tenders covers the provision of enterprise architecture, methodology, quality assurance and audit services.

street: SCH Building Plateau de Kirchberg

street: 560, rue de Neudorf

street: 17, rue Edmond Reuter


title: Conference on real estate statistics

description: The conference will be held in Luxembourg with a duration of two and a half days in the first half of 2019 in a venue situated in the centre of the city. The venue should allow convenient access for 100 participants and offer appropriate logistical infrastructure. The exact date of the meeting will be communicated to the contractor during the first half of 2018.

title: Conference on real estate statistics.

description: This invitation to tender covers the organisation of a conference on real estate statistics. The main objective of the contract is to provide the facilities and the practical organisation necessary to ensure an efficient and successful event.

European Commission, Eurostat

street: Bâtiment Ariane 00/B063 Tri central — Route D'Esch 400

Adria Congrex srl

street: via Sassonia 30


name: WHO Regional Office for Europe — European Observatory on Health Systems and Policies

description:
All bidders are expected to submit a CV demonstrating the following minimum requirements:
                  — A minimum of 15 years international experience with health systems and policy.
                  — A high level understanding of health policy and health systems comparison at national and European level.
                  — Experience of systematic country monitoring.
                  — Experience of evidence synthesis and excellent editing and writing skills.
                  — Experience with knowledge brokering and communication.
                  Familiarity with the Observatory's country monitoring programme is desirable, but not essential.
                  Bidders should follow the instructions set in the submission of their proposal to WHO.
                  Please refer to: http://www.euro.who.int/en/about-us/partners/observatory/about-us/calls-for-research-and-collaboration/request-for-proposals-technical-inputs-on-country-profiles

title: Country profiles — technical inputs.

description:
The European Observatory is looking for an individual to carry out technical review and coordination to deliver a series of country profiles.
               The task includes:
               — Extensive review to a set of 28 draft profiles,
               — Close and iterative collaboration with OECD and Observatory staff communicating changes, correction and shift in emphasis,
               — Close collaboration with HSPM reviewers,
               — Extensive contact with DG SANTE,
               — Development of revised author guidelines for the final stages of the project.
               Please refer to the WHO Request for Proposal document available at http://www.euro.who.int/en/about-us/partners/observatory/about-us/calls-for-research-and-collaboration/request-for-proposals-technical-inputs-on-country-profiles

street: Place Victor Horta 40/10


description: The subject matter of the contract is to provide a risk assessment of cyber threats in the energy sector as well as an analysis of existing or planned measures to mitigate these risks and their implementation and operational costs.

title: Study on the evaluation of risks of cyber incidents and on costs of preventing cyber incidents in the energy sector.

European Commission

street: rue Demot 24–26

name: Directorate-General for Energy, Unit B.3

Ecofys Germany GmbH

street: Am Wassermann 36


description: Implementation of training activities.

title: Organisation and implementation of training activities on animal disease preparedness: contingency planning and related measures under the ‘Better training for safer food’ initiative.

description: During the first phase, 15 training sessions in total with a total number of 450 participants for the whole training programme shall be organised. The same training programme must be implemented during the second phase of the contract.

street: Bâtiment Ariane; Route d'Esch 400

JVL Consulting SA as single tenderer

street: 15 rue Jean Matagne


title: Fourniture de produits, matériel et consommables médicaux pour les cabinets médicaux du Parlement européen sis à lot 1 — Bruxelles/lot 2 — Luxembourg.

description:
Le Parlement européen envisage la passation d'un marché public en vue de conclure des contrats-cadres afin de pouvoir s'approvisionner en produits, matériel et consommables médicaux pour les cabinets médicaux du Parlement européen. Ce marché sera divisé en 2 lots:
               lot 1 — cabinet médical de Bruxelles;
               lot 2 — cabinet médical de Luxembourg.

Parlement européen

street: Plateau du Kirchberg — boîte postale 1601

Médical promotion SA

street: Avenue du Bourgmestre Jean Neybergh 41


name: European Parliament, Directorate-General for Communication, European Parliament Information Office in Malta

title: Media monitoring and analysis services for Malta.

description: The European Parliament launches this procedure aiming to award a framework contract for daily monitoring of written press (national/regional), audiovisual media (radio, TV) and the main online (Internet) media. The purpose is to provide a timely, up-to-date compendium of daily information, in the form of press reviews, about the way in which topics of relevance to the European Parliament and the European Union are reported in the media. The European Parliament's Directorate-General for Communication is seeking to ensure it has the best possible knowledge of the media coverage across the EU on topics related to the European Union, the European Parliament and the activities of its President and MEPs. Media analysis will ultimately help the EP to better communicate EU policies to EU citizens and specific target audiences.

street: Europe House, 254, St Paul Street

countryName: MT

JP Advertising

street: Suites 5–7, Matilda Court, Triq Giuseppe Cali


title: Study on the European Union’s liabilities for pension and other employee benefits — actuarial services

description:
The requested services are subdivided into 5 tasks:
                  • tasks related to the 2017 liabilities (6 months until end of September 2018 the latest):
                  task 1:
                  development of the methodological approach, including all variables and data to be used to recalculate the actuarial liability of the EU pension funds and sickness insurance (31.5.2018 at the latest);
                  task 2:
                  testing (and possible revision) of the methodological approach using data from 2017, resulting in the recalculation of the actuarial liabilities for EU pension funds and sickness insurance for 2017, including an explanation of any significant (over 2 %) difference between the recalculated overall actuarial liability for 2017 and the liability calculated by Eurostat's experts. An explanation must be given for all differences over 10 % on subtotal calculations and individual parameters,
                  • tasks related to the 2018 liabilities (4 months until end of May 2019 the latest):
                  task 3:
                  recalculation of the actuarial liability of the EU pension funds and sickness insurance for 2018 using the chosen methodology and data for 2018 and provision of an explanation of any significant (over 2 %) difference between the recalculated overall actuarial liability for 2018, and the liability calculated by Eurostat's experts. An explanation must be given for all differences over 10 % on subtotal calculations and individual parameters;
                  task 4:
                  conclusions and recommendations on the calculation and methodology of the actuarial liability of the EU pension funds and sickness insurance,
                  • task following the submission of the 2 final reports:
                  task 5:
                  assistance to the Court in the clearance of the abovementioned results until 31.12.2019, including support to analyse comments received from the Commission and/or other stakeholders and to draft corresponding replies, as well as preparation of and participation in meetings with the Commission and/or other stakeholders (maximum 15 working days for all profiles described under point 3).

title: Study on the European Union’s liabilities for pension and other employee benefits - actuarial services

description: Contract for an expert study on the verification of the yearly calculations made by the Directorate General of the European Commission responsible for statistics (Eurostat) of the amount of the European Union’s liabilities for pension and other employee benefits for 2017 and 2018.

European Court of Auditors

street: 12, rue Alcide De Gasperi

Nexyan SPRL

street: Rue du Congrès 35


name: Environmental Protection Engineering S.A.

description: Provision of services related to fisheries patrol.

description:
The contractor shall provide EFCA with services related to fisheries patrol to cover for short-term needs up to maximum of 6 months. The vessel must be able to be deployed as a fisheries patrol vessel, i.e. a platform from which the surveillance, boarding and inspection of fishing vessels and related support and transport vessels shall be carried out. Such activities shall be conducted by authorised fisheries inspectors and shall always be coordinated by an official of EFCA on board the vessel.
               In view of possible multipurpose operations in the framework of European cooperation on coastguard functions, the vessel may also be deployed for operations other than fisheries inspection and control.

European Fisheries Control Agency

street: Avenida García Barbón, 4


name: European Commission, Directorate General for Trade Directorate C - Asia and Latin America

title: China Observatory: Monitoring of and Reporting about Key Economic Developments in China and China's Economic Policy; Development and Maintenance of a Foreign Investment Database

description: The results of the overall exercise shall be presented in 2 ‘China observatory’ reports per year addressing the developments formulated under Section 2.4 of the tender specifications. In addition, they should focus on topical issues as the need arises (normally 1 specific ‘feature article’ per report), a half-day presentation of each observatory report to interested EU institutions in Brussels and Beijing and Hong Kong, 4 ‘FDI flash reports’ per year following the quarterly update of the investment database as well as ad hoc briefs.

title: China Observatory: Monitoring of and reporting about key economic developments in China and China's economic policy; development and maintenance of a foreign investment database

description: To provide regular monitoring of, and reporting about, key macro-economic developments in China, China's exports and imports, and trends in inward and outwards foreign investment; development and maintenance of a foreign direct investment database.

street: CHAR 08/234, Rue de la Loi 170

Rhodium Group LLC

street: 5 Columbus Circle, Suite 1801

countryName: US


name: Association européenne pour la coordination de la représentation des consommateurs pour la normalisation

name: The European Environmental Citizens' Organisation for Standardisation

name: European Commission, Directorate-General for Energy

title: Consumers NGOs: stakeholder representation

description: The purpose of the contract is to ensure, for a 3-year period from the entry into force of the contract, that the views of European consumer organisations are well represented in the preparatory process leading to implementing measures and their reviews under the ecodesign and Energy Labelling Directive, including the assessment of voluntary agreements, both in the study phase, in the Ecodesign Consultation Forum and, if appropriate, thereafter. This shall also cover the preparatory and review processes of related policy tools, notably the Tyre Labelling Regulation and the Energy Star programme. Finally, the aim of the contract is also to ensure that consumer NGOs, being closest to consumers and citizens, provide adequate and tailor-made information to these target groups on specific EU product energy efficiency policy measures and on their impacts and benefits.

title: Support in the preparatory work for ecodesign and energy labelling measures including tyres labelling and Energy Star labelling programme from environmental NGOs: stakeholder representation

title: Environmental NGOs: stakeholder representation

description: The purpose of the contract is to ensure, for a 3-year period from the entry into force of the contract, that the views of environmental NGOs are well represented in the preparatory process leading to implementing measures and their reviews under the ecodesign and Energy Labelling Directive, including the assessment of voluntary agreements, both in the study phase, in the Ecodesign Consultation Forum and if appropriate thereafter. This shall also cover the preparatory and review processes of related policy tools, notably the Tyre Labelling Regulation and the Energy Star programme. Finally, the aim of the contract is also to ensure that environmental NGOs, being closest to consumers and citizens, provide adequate and tailor-made information to these target groups on specific EU product energy efficiency policy measures and on their impacts and benefits.

title: Support in the preparatory work for ecodesign and energy labelling measures including tyres labelling and Energy Star labelling programme.

description: Article 18 of Directive 2009/125/EC of the European Parliament and of the Council stipulates that ‘the Commission shall ensure that, in the conduct of its activities, it observes, in respect of each implementing measure, a balanced participation of Member States' representatives and all interested parties concerned with the product group in question, such as industry, including SMEs and craft industry, trade unions, traders, retailers, importers, environmental protection groups and consumer organisations’.

street: rue Demot 24


description:
The objective of this contract is the coordination of the PPP surveys on consumer goods prices and to obtain PPPs in the area of household final consumption expenditure for 37 countries participating in the PPP programme.
                  The contractor prepares, coordinates and reports on the consumer goods price surveys undertaken in the participating countries and validates the prices observed in close cooperation with them.
                  — 18 up to 21 country missions of duration of 2 days (i.e. the total volume is around 74 up to 84).
                  — 4 country meetings of duration of 2 days (i.e. the total volume is around 16).

title: Coordination of purchasing power parities consumer goods price surveys.

European Commission, Eurostat

street: rue Alcide de Gasperi

Instituto Nacional de Estatística

street: Avenida António José de Almeida

countryName: PT


name: European Commission Representation in Estonia

title: Security Guard and Reception/Switchboard services for the EU-House in Tallinn, Estonia

description: The European Commission Representation in Tallinn / Estonia, acting also on behalf of the European Parliament Information Office in Estonia, is looking for Security Guard and Reception / Switchboard services for the EU-House premises in Tallinn. The objective is the provision of a uniformed and trained, unarmed, security guard service to perform routine protective and access control duties and reception/switchboard services.

title: Security guard and reception/switchboard services for the EU House in Tallinn, Estonia.

street: Rävala 4

countryName: EE

AS G4S Eesti

street: Vesipapi tn 2


description: Lot 1 : langue anglaise : expression et compréhension orales des personnels en contact direct avec les publics(accueil, surveillance, sécurité, billetterie,vente,médiation humaine)

description: Lot 2 : langue anglaise : expression et compréhension orales et écrites pour les personnels des musées et services centraux occupant des fonctions administratives, commerciales ou liées à la production d'exposition ou projets culturels

title: Prestations de formations professionnelles portant sur le thème stages linguistiques en intra ou inter entreprises

description: 410 ; Formation

Etablissement public Paris Musées

street: 27, des petites écuries


name: Secrétariat général du Conseil de l'Union européenne

title: Fourniture régulière et ponctuelle de fleurs et services associés.

description: Conclusion d'un contrat-cadre avec maximum 3 contractants pour la fourniture régulière et ponctuelle de fleurs et services associés.

street: Rue de la Loi 175

Voltige SPRL

street: Rue de l'Yser 17 B1 E


title: Supplying Argo oceanographic profiling floats for Euro-Argo ERIC.

description: Euro Argo ERIC intends to purchase 100 floats per year for its activities and those of its members (10 European countries). Euro Argo will act as main purchaser. It opens a restricted procedure for the selection of the candidates. To ensure the sustainability of its operational network, Euro Argo has decided to accept only materials with verified at sea life span, relating on statistics available on www.jcommops.org website.

Euro-Argo ERIC

street: 1625 route de Sainte Anne

NKE Instrumentation

street: Rue Gutenberg ZI de Kerandré


name: European Commission, Joint Research Centre (JRC), JRC.R — Resources, JRC.R.5 — Resource Management Geel

title: Maintenance of the fire detection system at the JRC Geel site

description:
In order to maintain the fire detection system the JRC Geel wishes to conclude a contract for the following services:
                  (1) inventory of the fire detection system, maintenance procedures and checklists and maintenance management system;
                  (2) the preventive maintenance;
                  (3) the corrective maintenance (i.e. repairs) including the possibility of interventions outside the normal working hours;
                  (4) the replacement of old components and subsystems with new ones;
                  (5) a 24-hour on-call service;
                  (6) the extension and adaptation of the system due to changes in the infrastructure.

title: Maintenance of the fire detection system at JRC Geel site.

description: The JRC Geel site currently has a fire detection system in place which requires regular maintenance and upgrades.

street: Retieseweg 111

Siemens nv

street: Guido Gezellestraat 123


title: Défibrillateur cardiaque implantable Simple chambre

description: Préciser la notion 'Irm compatible', le type de connexion, les codes Lpp

title: Défibrillateur cardiaque implantable Double chambre

title: Défibrillateur cardiaque implantable Triple chambre

title: Sonde de défibrillation ventriculaire droite

title: Fourniture de défibrillateurs cardiaques implantables, sondes, et dispositifs médicaux associés

description: 212 ; Matériel médical

Institut Mutualiste Montsouris

street: 42 boulevard Jourdan


title: SERVICII CULTURAL ARTISTICE FESTIVAL OPERA COPIILOR

description: PRESTAREA SERVICIILOR SI REALIZAREA PRODUSELOR SPECIFICE ORGANIZARII EVENIMENTELOR COMPONENTE ALE FESTIVALULUI OPERA COPIILOR. PROCEDURA PROPRIE SIMPLIFICATA DESFASURATA.

procurementMethodDetails: Norme proprii (Anexa 2B)

OPERA COMICA PENTRU COPII

countryName: Romania