title: CONSTRUCTION OF 3NOS SOLAR POWERED BOREHOLE IN OWO LOCAL GOVERNMENT AREA (CENTRAL), ONDO STATE

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Construction of properly labelled sample box, collection of lithological samples for analysis and submitted to the Planning and Design Department.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) UPVC Casing

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear, sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including four copies of report.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client.

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and/or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: Construction of mud pit, settling pits and flow channels.

description: Mobilisation of equipment, materials and personnel to site, rig up activities and dismantling demobilisation on completion of works.

description: Construction of sample boxes, collection of lithologic samples for analysis and sample box should be submitted to the client.

description: Drilling through loose sedimentary formation of an appropriate bore diameter to    accommodate OD 125mm x 7.5mm UPVC casings

description: Allow for control of loss of circulation

description: Provide and install OD 125mm x 7.5mm UPVC Casing pipes (TRAPEZOIDAL THREADED BOTH SIDES - M/F).

description: Provide and install OD 125mm x 7.5mm UPVC Screens (TRAPEZOIDAL THREADED) both sides M/F (DIN4925).

description: Provide and place approved uniformly graded rice gravel for packing around the borehole annulus (not granite chipping)

description: Backfilling of annulus with appropriate material (clean whitish sand materials free from incrustations or according to Engineer’s specification) around the casing up to 3 meters to the surface

description: Place cement and sand slurry around casing as grout to a depth of 4 meters.

description: Provide for four copies of complete technical reports including progress photographs for each project location (to be collated by the client).

description: Provide and install Solar Powered Submersible pump SQ Flex series with solar modules to a total capacity of 1600W, 120 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve,  plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

title: Actual Tendering for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN  ONDO SOUTH

title: Bid opening for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN  ONDO SOUTH

title: Bid Evaluation for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN  ONDO SOUTH

eligibilityCriteria: AS STATED IN THE ADVERT

awardCriteriaDetails: AS STATED IN THE ADVERT

submissionMethodDetails: AS STATED IN THE ADVERT

BLUE FORTUNE LTD

legalName: Blue Fortune Limited

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN  ONDO SOUTH

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN  ONDO SOUTH

title: Assessment milestones for CONSTRUCTION OF SOLAR POWERED BOREHOLES IN AGO-ALAYE, AMAPERE, BAMIKEMO, KAJOLA, AYESAN ONDO SOUTH SENATORIAL DISTRICT.

title: Approval milestones for Award of Contract for Establishment of 26NOS. Solar Powered Streetlight in Uje-Oro Uromi, Esan North East LGA, Edo State


currency: NGN

status: active

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community including reports duly signed and sealed by a COMEG registered Geoscientist.

description: Clear project site of all bushes, Vegetation, and rubbish including grubbing out roots and disposed as directed.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Construction of properly labelled sample box, collection of lithologic samples for analysis and submitted to Planning and Design Department.

description: Drilling through sedimentary formation of an appropriate well diameter of 300mm to accommodate 200mm diameter casing pipes.

description: Allow for circulation loss (Provisional)

status: complete

code: engagement

title: Actual Tendering for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJE, UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA, ED

status: met

type: engagement

title: Bid opening for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJE, UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA, ED

title: Bid Evaluation for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJE, UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA, ED

awardCriteria: ratedCriteria

procurementMethod: open

eligibilityCriteria: As stated in the Advertisement

awardCriteriaDetails: As stated in the Advertisement

submissionMethodDetails: As stated in the Advertisement

procurementMethodDetails: National Competitive Bidding

procurementMethodRationale: COMPETITIVE BIDDING

MOBOL VENTURES LIMITED

roles: supplier tenderer payee

scheme: NG-BPP

legalName: MOBOL VENTURES LTD

BENIN/ OWENA RBDA

roles: buyer payer procuringEntity

legalName: BENIN/ OWENA RBDA

description: EXPENDITURE

rationale: WATER

code: preProcurement

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJE, UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA, ED

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJE, UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA, ED

code: assessment

title: Assessment milestones for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN OKPUJIE UROMI IN ESAN NORTH EAST LOCAL GOVERNMENT AREA,  EDO STATE. (LOT B408).

code: approval

title: Approval milestones for Procurement of HP Cartridges

initiationType: tender


description: REPLACEMENT OF 3NOS. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN WITH DUCTILE IRON PIPE 225MM DIAMETER AT AGUA IRRUA WATER SUPPLY SCHEME. (PHASE I)

description: Replacement of High lift pumps with a delivery head of not less than 75 meters and discharge of 90m3/hr

description: Exhume the existing 200mm diameter rising main and keep for re-use as directed by the engineer

description: Excavation of trench for pipeline la

description: Supply and lay 225mm diameter ductile iron pipeline. Inclusive of flanges, gaskets, bolts, nuts, etc

description: Allow for excavation of concrete pavement, bituminous asphaltic pavements.

description: Allowed for backfilling of layed pipeline, chambers etc

description: Provide and install pipeline fittings: Air valves,

description: Provide and install pipeline fittings: Sluice valves,

description: Provide and install pipeline fittings: Wash out,

description: Provide and install pipeline fittings: Block wall chambers of size 0.6m x 0.6m x 0.6m with concrete cover,

description: Provide and install pipeline fittings: Thrust block.

description: Allow for pipeline testing

description: Allow for As-Built drawings for pipeline route

title: Actual Tendering for REPLACEMENT OF 3NO. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN

title: Bid opening for REPLACEMENT OF 3NO. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN

title: Bid Evaluation for REPLACEMENT OF 3NO. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN

eligibilityCriteria: AS ADVERTISED IN THE MEDIA

awardCriteriaDetails: AS ADVERTISED IN THE MEDIA

submissionMethodDetails: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THIS REPAIR WORKS

procurementMethodRationale: THE SUPPLY OF THE BULLDOZER IS WITHIN THE PTB APPROVAL THRESHOLD

CONNAFLO LIMITED

legalName: CONNAFLO LIMITED

description: REPLACEMENT ALREADY FAULTY SUBMERSIBLE PUMPS AND ENSURE THAT BOREHOLES ARE FUNCTIONAL FOR MUNICIPAL

rationale: TO BOOST MUNICIPAL WATER SUPPLY IN AGUA IRRIA

title: Advert of Expression of Interest

description: Advert of Expression of Interest for REPLACEMENT OF 3NO. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN

title: Request for proposal

description: Invitation for request for proposal for REPLACEMENT OF 3NO. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN

description: Excavation of trench for pipeline la

description: Allow for pipeline testing

title: Assessment milestones for CONTRACT FOR THE REPLACEMENT OF 3NOS. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN WITH DUCTILE IRON PIPE 225MM DIA

title: Approval milestones for Oracle support and maintenance fees for the period of january 2018 - January,2019


description: DEVELOPMENT OF EXISTING BOREHOLE AND EQUIPPING WITH NEWLY PURCHASED HIGH HEAD SUBMERSIBLE PUMPS

description: Mobilization of equipment, materials and personnel to site and demobilization on completion of works

description: Supply and install 74kw (100HP) submersible pump Groundfos with a delivery head of at least 300 meters, Stainless steel impeller including autotransformer motor starter with phase failure, water level indicator, breaker, pilot lamp and switch button for start

description: Supply and install 37kw (50HP) submersible pump Groundfos with a delivery head of at least 300 meters, Stainless steel impeller including autotransformer motor starter with phase failure, water level indicator, breaker, pilot lamp and switch button for start

description: Provide for cleaning of existing steel risers and well coated with anti-rust paint

description: Provide for stainless steel reducer and protective basket for submersible pump and brazing of riser pipes as directed by the engineer

description: Supply and install 70mm x 4 submersible cable including joint kits

description: Provide for connection of borehole to power supply including cable locks

description: Provide for well head, valves, and pipe connection

title: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THE CONSTRUCTION OF BOREHOLE IN AGUA IRRUA WATER

title: Actual Tendering for CONSTRUCTION OF MOTORISED BOREHOLE IN AGUA IRRUA, EDO STATE

title: Bid opening for CONSTRUCTION OF MOTORISED BOREHOLE IN AGUA IRRUA, EDO STATE

title: Bid Evaluation for CONSTRUCTION OF MOTORISED BOREHOLE IN AGUA IRRUA, EDO STATE

description: UNCOMPLETED FINANCIAL TENDER FOR THE CONSTRUCTION OF BOREHOLE IN AGUA IRRUA WATER SCHEME

submissionMethodDetails: WRITING OF BIDDERS' INTENDED RATES AND AMOUNTS ON THE COLLECTED UNCOMPLETED BEME

CHARLECH LIMITED

legalName: CHARLECH LIMITED

description: DRILLING OF BOREHOLE AND EQUIPPING IT FOR MUNICIPAL USE IN AGUA IRRUA COMMUNITY

rationale: WATER SUPPLY FOR MUNICIPAL USE IN AGUA IRRIA COMMUNITY

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF MOTORISED BOREHOLE IN AGUA IRRUA, EDO STATE

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF MOTORISED BOREHOLE IN AGUA IRRUA, EDO STATE

title: Assessment milestones for CONTRACT FOR THE CONSTRUCTION OF BOREHOLE IN AGUA IRRUA WATER SCHEME, EDO STATE

description: DEVELOPMENT OF EXISTING BOREHOLE AND EQUIP WITH A NEWLY PURCHASED HIGH HEAD SUBMERSIBLE PUMP

title: Approval milestones for Payment of Tableau BI support for the period of 2018 and 2019


title: CONTRACT FOR THE REHABILITATION WORKS AT AGUA IRRUA WATER SCHEME, EDO STATE

description: REHABILITATION OF AGUA IRRUA WATER SCHEME

description: Allow for construction of project 2 Nos. signboard as directed (see attached drawing)

description: Services to client representative (s)

description: Allow for maintenance and running of client Project Vehicle(s)

description: Community Sensitization and commissioning

description: Capacity Building

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client

description: GEOLOGICAL / HYDROGEOLOGICAL / HYDROGEOPHYSICAL INVESTIGATION Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and/or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: Construction of mud pit, settling pits and flow channels

description: Mobilisation of equipment, materials and personnel to site, rig up activities and dismantling demobilisation on completion of works.

description: Construction of sample boxes, collection of lithologic samples for analysis and sample box should be submitted to the client

description: Drilling through sedimentary formation of an appropriate bore diameter to    accommodate OD 225mm x 11.2mm UPVC casings: 0 – 100

description: Drilling through sedimentary formation of an appropriate bore diameter to    accommodate OD 225mm x 11.2mm UPVC casings: 100 – 150

description: Drilling through sedimentary formation of an appropriate bore diameter to    accommodate OD 225mm x 11.2mm UPVC casings: Above 150

description: Allow for control of loss of circulation (PROVISIONAL)

description: Provide and install OD 225mmx 11.2mm UPVC Casing pipes (TRAPEZOIDAL THREADED BOTH SIDES - M/F).

description: Provide and install OD 225mm x 11.2mm UPVC Screens (TRAPEZOIDAL THREADED) both sides M/F (DIN4925).

description: Provide and place approved uniformly graded rice gravel for packing around the borehole annulus (not granite chipping)

description: Backfilling of annulus with appropriate material (clean whitish sand materials free from incrustations or according to Engineer’s specification) around the casing up to 3 meters to the surface

description: Place cement and sand slurry around casing as grout to a depth of 4 meters

description: Place 0.6m x 1m x 1m mass concrete slab of Grade 25 around casing.

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear and sand free and non-turbid

description: Pumping test of well for at least 72 hours (multi stage pumping test, 3 stages) by a COMEG certified Hydrogeologist including four copies of report. Report should be submitted within one week of conducting the test

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved Laboratory. Water quality sample must be collected by the client’s representative

description: Provide and install Solar Powered Submersible pump SQ Flex series with delivery head of not less than 200 meter and a discharge of not less than 3 m3/ hour. Solar modules with total capacity of 1600W, 180 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve, plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install UPVC riser pipes 16 bar threaded with M/F joint and diameter of 31.25mm

description: Allow for the provision and installation of flow meter and pressure gauge (Provisional Sum).

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement

description: Provide and cast in-situ vibrated concrete 1:11/2:3 mix for tank foundation

description: 20mm diameter x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 60mm x 60mm x 10mm thick equal angle horizontal bracing

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: Provide, fabricate and erect steel ladder with hoops

description: Provide, fabricate and erect hand rail to cat walk to Engineer specifications

description: 300mm x 150mm x 8mm thick mild steel gusset plate

description: 300mm x 300mm x 8mm thick mild steel gusset plate

description: 600mm x 150mm x 8mm thick mild steel gusset plate

description: 16mm diameter bolt complete with nut and washer for gusset plate

description: Painting work with two coats of red oxide and aluminium

description: Supply and erection of corrugated steel tank of capacity 22.5 cubic meters from not less than 6mm thick mild steel plate together with cover internally braced by welding. Externally flanged complete with all necessary accessories. Bolts, nuts, washers, manhole. Water level indicator, etc.

description: Transportation of all fabricated components to site

description: Supply and fix a complete set of plumbing pipes and fittings to water tank of 6m structure steel tower inlet and outlet piping system plus washout and overflow. All pipes to be UPVC 16 bars and 31.25mm diameter

description: Provide and install 40 metres chain linked perimeter fence (3mm thick and 2.4m high wire gauze) mounted on two (3Nos.) courses of rendered block wall in 100mm thick concrete foundation. Chain link fence braced vertically at 3metres centre to centre & horizontally at the top with 50mm galvanized steel pipe.

description: Provision of ten service taps as collection point and connection to borehole in concrete platform with 150mm UPVC drain connected to 1.2x1.2x1.5m deep, soak away pit as directed by the Engineer. All pipes to be UPVC 16 bars and 31.25mm diameter.

title: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THE CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFA

title: Actual Tendering for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LGA, EDO STATE

title: Bid opening for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LGA, EDO STATE

title: Bid Evaluation for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LGA, EDO STATE

description: DRILL AND EQUIP BOREHOLE AND CONSTRUCT FETCHING BAY

submissionMethodDetails: COMPLETING BY WRITING THE RATES FOR EACH TENDER ITEMS

NEWPRIME ENGINEERING SERVICES LIMITED

legalName: NEWPRIME ENGINEERING SERVICES LIMITED

description: DRILL AND EQUIP BOREHOLE WITH SOLAR POWERED SUBMERSIBLE PUMP FOR MUNICIPAL WATER SUPPLY IN AFASHIO C

rationale: WATER FOR MUNICIPAL WATER SUPPLY IN AFASHIO

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LGA, EDO STATE

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LGA, EDO STATE

description: Services to client representative (s)

description: Capacity Building

description: 12mm diameter reinforcement

description: 10mm mild steel plate as end cap

title: Assessment milestones for CONTRACT FOR THE CONSTRUCTION OF SOLAR POWERED BOREHOLE AT AFASHIO, ETSAKO WEST LOCAL GOVERNMENT AREA, EDO STATE

description: CONSTRUCTION OF SOLAR POWERED BOREHOLE IN AFASHIO COMMUNITY

title: Approval milestones for Procurement of tablets for essential staff of the board


description: CONSTRUCT HAND PUMP BOREHOLES

description: Allow for construction of project signboard as directed (see attached drawing)

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Allow for maintenance and running of client Project Vehicle(s)

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client.

description: Community Sensitization and commissioning

description: Capacity Building

description: GEOLOGICAL / HYDROGEOLOGICAL / HYDROGEOPHYSICAL INVESTIGATION Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: PREPARATION Clearing of site, construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: MOBILISATION AND DEMOBILISATION Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) UPVC Casing

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear and sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including two copies of report. Report should be submitted within one weeks of conducting the test.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved Laboratory. Water quality sample must be collected by the client’s representative

description: clearing of site, construction of mud pit, flow     channels , rig up activities and dismantling on completion

description: Construction of sample boxes, collection of lithologic samples for analysis and submitted to the client.

description: Drilling through loose sedimentary formation of an appropriate bore diameter to    accommodate OD 225mm x 11.2mm UPVC casings: 0 - 50

description: Provide and install OD 160mmx 8.5mm UPVC Casing pipes (TRAPEZOIDAL THREADED BOTH SIDES - M/F) (DIN4925).

description: Provide and install OD 160mm x 8.5mm UPVC Screens (TRAPEZOIDAL THREADED) both sides M/F (DIN4925).

description: Provide and place approved uniformly graded rice gravel for packing around the borehole column (not granite chipping)

description: Backfilling of annulus with appropriate material (clean whitish sand materials free from incrustations or according to Engineer’s specification) around the casing up to 3 meters to the surface (see attached drawing).

description: Placement of mass concrete of 1:2:4 mix from 4 metres below the ground level around the casing to 0.5 metres above the surface (see attached drawing).

description: Placement of  0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around

description: Pumping test of well for at least 24 hours (multi stage pumping test, 3 stages) by a COMEG certified Hydrogeologist including four copies of report. Report should be submitted within one weeks of conducting the test

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s Laboratory. The result shall be attached to each copy of the pumping test report

description: Supply and Install hand pump (Mark 11) OR its equivalent

title: Actual Tendering for HAND PUMP BOREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, ALOKUTA LAYAT

title: Bid opening for HAND PUMP BOREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, ALOKUTA LAYAT

title: Bid Evaluation for HAND PUMP BOREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, ALOKUTA LAYAT

eligibilityCriteria: AS LISTED IN THE ADVERTISEMENT

awardCriteriaDetails: AS LISTED IN THE ADVERTISEMENT

submissionMethodDetails: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THE CONSTRUCTION OF HANDPUMP BOAREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, OLOKUTA LAYATO, TEMIDIRE, IJU-ODO, GBOGI, IGBOROWO CAMP, LEKON, ESK-AMA IN ONDO SOUTH SENATORIAL DISTRICT. (LOT B407)

procurementMethodRationale: THE SCOPE OF WORKS IS WITHIN THE PTB THRESHOLD

ESITON INTEGRATED NIGERIA LIMITED

legalName: ESITON INTEGRATED NIGERIA LIMITED

description: DRILL BOREHOLES AND EQUIP WITH HANDPUMP FOR MUNICIPAL WATER SUPPLY IN VARIOUS COMMUNITIES OF ONDO ST

rationale: WATER SUPPLY FOR MUNICIPAL USE IN VARIOUS COMMUNITIES OF ONDO STATE

title: Advert of Expression of Interest

description: Advert of Expression of Interest for HAND PUMP BOREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, ALOKUTA LAYAT

title: Request for proposal

description: Invitation for request for proposal for HAND PUMP BOREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, ALOKUTA LAYAT

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Capacity Building

title: Assessment milestones for CONTRACT FOR THE CONSTRUCTION OF HANDPUMP BOAREHOLE AT ILE-FUNFUN, AGO ALAYE, AYESAN, ASEWELE KOREDE, KIRIBO, ABA PANU, OLOKUTA LAYATO, TEMIDIRE, IJU-

description: DRILL SEVERAL HAND PUMP BOREHOLES AND EQUIP THEM

title: Approval milestones for Procurement of ICT work tools


title: CONTRACT FOR THE CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO STATE.

description: DRILL PRODUCTIVE BOREHOLE AND EQUIP WITH SOLAR POWERED SUBMERSIBLE PUMP WITH SOLAR PANELS

description: Allow for construction of project signboard as directed (see attached drawing)

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Allow for maintenance and running of client Project Vehicle(s)

description: Community Sensitization and commissioning

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and/or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: Construction of mud pit, settling pits and flow channels

description: Mobilisation of equipment, materials and personnel to site, rig up activities and dismantling demobilisation on completion of works.

description: Construction of sample boxes, collection of lithologic samples for analysis and sample box should be submitted to the client

description: Drilling through loose sedimentary formation of an appropriate bore diameter to    accommodate OD 225mm x 11.2mm UPVC casings: Above 50 (Rates Only)

description: Allow for control of loss of circulation (PROVISIONAL)

description: Provide and install OD 225mmx 11.2mm UPVC Casing pipes (TRAPEZOIDAL THREADED BOTH SIDES - M/F).

description: Provide and install OD 225mm x 11.2mm UPVC Screens (TRAPEZOIDAL THREADED) both sides M/F (DIN4925).

description: Provide and place approved uniformly graded rice gravel for packing around the borehole annulus (not granite chipping)

description: Backfilling of annulus with appropriate material (clean whitish sand materials free from incrustations or according to Engineer’s specification) around the casing up to 3 meters to the surface

description: Place cement and sand slurry around casing as grout to a depth of 4 meters.

description: Place 0.6m x 1m x 1m mass concrete slab of Grade 25 around casing

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear and sand free and non-turbid

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including four copies of report. Report should be submitted within one week of conducting the test

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide and install Solar Powered Submersible pump SQ Flex series with solar modules to a total capacity of 1600W, 120 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve, pressure gauge, plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install riser pipes (pipe OD 50mm)  for pump

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: In-situ vibrated concrete 1:2:4 mix for base and dwarf column

description: 20mm dia x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 60mm x 60mm x 5mm thick equal angle diagonal cross bracing to stanchion length 3.61m

description: 60mm x 60mm x 5mm thick equal angle horizontal bracing

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: Provide, fabricate and erect steel ladder with hoops

description: Provide, fabricate and erect hand rail to cat walk to Engineer specifications

description: 300mm x 150mm x 8mm thick mild steel gusset plate

description: 300mm x 300mm x 8mm thick mild steel gusset plate

description: 600mm x 150mm x 8mm thick mild steel gusset plate

description: 16mm dia bolt complete with nut and washer for gusset plate

description: Painting work with two coats of red oxide and aluminium

description: Supply and erection of corrugated steel tank of capacity 22.5 cubic meters from not less than 4mm thick mild steel plate together with cover internally braced. Externally flanged complete with all necessary accessories. Bolts, nuts, washers, manhole. Water level indicator, etc

description: Transportation of all fabricated components to site

description: Supply and fix a complete set of plumbing pipes and fittings to water tank of 6m structure steel tower inlet and outlet piping system plus washout and overflow. All pipes to be UPVC 16 bars

description: Provide and install 40 metres chain linked perimeter fence (3mm thick and 2.4m high wire gauze) mounted on two (3Nos.) courses of rendered block wall in 100mm thick concrete foundation. Chain link fence braced vertically at 3metres centre to centre & horizontally at the top with 50mm galvanized steel pipe.

description: Provision of ten service taps as collection point and connection to borehole in concrete platform with 150mm PVC floor drain connected to 1.2 x 1.2 x 1.5m deep, soak away pit as directed by the Engineer

title: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THE CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BORE

title: Actual Tendering for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO

title: Bid opening for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO

title: Bid Evaluation for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO

description: CONSTRUCT SOLAR POWERED PRODUCTIVE BOREHOLES AND EQUIP THEM WITH SOLAR POWERED SUBMERSIBLE PUMPS AND SOLAR PANELS

submissionMethodDetails: COMPLETION OF THE BLANK FINANCIAL BEME FOR THE TENDER

GEO PHRAIM NIGERIA LIMITED

legalName: GEO PHRAIM NIGERIA LIMITED

description: DRILLING OF BOREHOLE AND EQUIP WITH SOLAR POWERED SUBMERSIBLE PUMP FOR MUNICIPAL WATER SUPPLY IN LAR

rationale: CONSTRUCTION OF BOREHOLES FOR MUNICIPAL WATER SUPPLY IN LARABA CRESCENT OF ONDO STATE

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Backfill and compact

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

title: Assessment milestones for CONSTRUCTION OF INDUSTRIAL SOLAR POWERED BOREHOLE AT LARABA CRESCENT, IGBOTAKO, OKITIPUPA LGA, ONDO STATE

description: DRILL A PRODUCTIVE BOREHOLE AND EQUIP WITH A SOLAR POWERED SUBMERSIBLE PUMP AND SOLAR PANELS

title: Approval milestones for Award of Contract for Establishment of Solar Powered Streetlight Wukari/Ibi Fed. Const. Taraba State (10NOS. and 11NOS.)


description: CONSTRUCTION OF 2NOS. MOTORISED BOREHOLES AT ITA-AWURE AREA AND OWODE IGBOEYE AREA, EFON ALAAYE, EFON LOCAL GOVERNMENT AREA, EKITI STATE

description: Allow for construction of project signboard as directed (see attached drawing)

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Allow for maintenance and running of client Project Vehicle(s)

description: Community Sensitization and commissioning

description: Capacity Building

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works

description: Construction of sample boxes, collection of lithologic samples for analysis and submitted to the client

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) UPVC Casing

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear and sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including two copies of report. Report should be submitted within one weeks of conducting the test

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide and install Solar Powered Submersible pump SQ Flex series with solar modules to a total capacity of 1600W, 120 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve,  plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install UPVC riser pipes 16 bar with threaded M/F joint and diameter of 31.25mm

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: In-situ vibrated concrete 1:2:4 mix for base and dwarf column

description: 20mm dia x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 60mm x 60mm x 5mm thick equal angle diagonal cross bracing to stanchion length 3.61m

description: 60mm x 60mm x 5mm thick equal angle horizontal bracing

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: 300mm x 150mm x 8m thick mild steel gusset plate

description: 300mm x 300mm x 8m thick mild steel gusset plate

description: 600mm x 150mm x 8m thick mild steel gusset plate

description: Supply and erection of corrugated steel tank of capacity 22.5 cubic meters from not less than 4mm thick mild steel plate together with cover internally braced. Externally flanged complete with all necessary accessories. Bolts, nuts, washers, manhole. Water level indicator, etc.

title: BILL OF ENGINEERING MEASUREMENT AND EVALUATION FOR THE CONSTRUCTION OF 2NOS. MOTORISED BOREHOLES AT

title: Actual Tendering for CONSTRUCTION OF 2NOS MOTORISED BOREHOLE EACH AT ITA-AWURE AREA, AND OWODE IGBOEYE AREA, EFON ALAAYE,

title: Bid opening for CONSTRUCTION OF 2NOS MOTORISED BOREHOLE EACH AT ITA-AWURE AREA, AND OWODE IGBOEYE AREA, EFON ALAAYE,

title: Bid Evaluation for CONSTRUCTION OF 2NOS MOTORISED BOREHOLE EACH AT ITA-AWURE AREA, AND OWODE IGBOEYE AREA, EFON ALAAYE,

submissionMethodDetails: COMPLETION OF THE BILL OF ENGINEERING MEASUREMENT AND EVALUATION BEFORE SUBMISSION

description: DRILLING AND EQUIPPING OF BOREHOLES WITH SOLAR POWERED SUBMERSIBLE PUMPS IN SELECTED COMMUNITIES IN

rationale: MUNICIPAL WATER SUPPLY

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF 2NOS MOTORISED BOREHOLE EACH AT ITA-AWURE AREA, AND OWODE IGBOEYE AREA, EFON ALAAYE,

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF 2NOS MOTORISED BOREHOLE EACH AT ITA-AWURE AREA, AND OWODE IGBOEYE AREA, EFON ALAAYE,

description: Services to client representative (s)

description: Auditing and Monitoring of project

description: Capacity Building

description: Backfill and compact

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

title: Assessment milestones for AWARD OF CONTRACT FOR THE CONSTRUCTION OF 2NOS. MOTORISED BOREHOLES AT ITA-AWURE AREA AND OWODE IGBOEYE AREA, EFON ALAAYE, EFON LOCAL GOVERNMENT AREA,

title: Approval milestones for Award of Contract for Establishment of 18NOS, Solar Powered Streetlight in Damaturu LGA, Gujuba LGA, Gulani LGA, Geidam LGA, Busari LGA, Tarmuna LGA a


description: PROVISION OF ALL-IN-ONE INTEGRATED SOLAR POWERED STREET LIGHT/UNIT

description: Provide and install  all-in-one 80W integrated solar powered street light

title: Actual Tendering for REVITALIZATION OF RBDA: POWER SUPPLY AND MAINTENANCE

title: Bid opening for REVITALIZATION OF RBDA: POWER SUPPLY AND MAINTENANCE

title: Bid Evaluation for REVITALIZATION OF RBDA: POWER SUPPLY AND MAINTENANCE

description: MAINTAIN ELECTRICITY SUPPLY AND DISTRIBUTION WITHIN THE AUTHORITY'S FACILITIES

rationale: POWER SUPPLY MAINTENANCE

title: Advert of Expression of Interest

description: Advert of Expression of Interest for REVITALIZATION OF RBDA: POWER SUPPLY AND MAINTENANCE

title: Request for proposal

description: Invitation for request for proposal for REVITALIZATION OF RBDA: POWER SUPPLY AND MAINTENANCE

title: Assessment milestones for REVITALIZATION OF RIVER BASIN DEVELOPMENT AUTHORITY (RBDA): POWER SUPPLY AND MAINTANANCE.

title: Approval milestones for Provision of Consultancy Services to Facilitate Ministerial Strategies Retreat for MPR Chief Executives on Key Outcomes of the August 2019 Presidentia


description: Supply of JX 75HP 2-Wheel Drive CASE Tractor / Messy Ferguson Tractor / Equipment

description: Supply of Baldan 3-Disc Plough

description: Supply of SP-20 Baldan Disc Harrow

description: Supply of SD-4 Disc Ridger

description: Supply Trailer

description: Supply Slasher

description: Add transportation of goods and assembly of the accessories for 4Nos tractors and eight implements

description: Allow for Capacity Building

title: SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT, EKITI STATE. (LOT C402).

title: Actual Tendering for PURCHASE OF 2 NOS MERCY FERGUSON TRACTORS FOR INTEGRATED FARMS AT HEADQUARTERS

title: Bid opening for PURCHASE OF 2 NOS MERCY FERGUSON TRACTORS FOR INTEGRATED FARMS AT HEADQUARTERS

title: Bid Evaluation for PURCHASE OF 2 NOS MERCY FERGUSON TRACTORS FOR INTEGRATED FARMS AT HEADQUARTERS

VEBBS VENTURES LIMITED

legalName: VEBBS VENTURES LIMITED

description: EXPENDITURE

rationale: SUPPLY

title: Advert of Expression of Interest

description: Advert of Expression of Interest for PURCHASE OF 2 NOS MERCY FERGUSON TRACTORS FOR INTEGRATED FARMS AT HEADQUARTERS

title: Request for proposal

description: Invitation for request for proposal for PURCHASE OF 2 NOS MERCY FERGUSON TRACTORS FOR INTEGRATED FARMS AT HEADQUARTERS

description: Supply of Baldan 3-Disc Plough

description: Supply of SP-20 Baldan Disc Harrow

description: Supply of SD-4 Disc Ridger

description: Supply Trailer

description: Supply Slasher

description: Allow for Capacity Building

title: Assessment milestones for Supply of Messy Ferguson (MF) Tractors To Ekiti Central Senatorial District, Ekiti State

title: Approval milestones for Technical Audit for School Support project in the North Central


title: WATER SUPPLY SCHEME AT IUBIUGHURU-IULEHA OWAN LOCAL GOVERNMMENT AREA EDO STATE

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community including reports duly signed and sealed by a COMEG registered Geoscientist.

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Construction of properly labelled sample box, collection of lithologic samples for analysis and submitted to Planning and Design Department.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) UPVC Casing

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear, sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including two copies of report.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client.

description: Provide and install Solar Powered Submersible pump SQ Flex series with solar modules to a total capacity of 1600W, 120 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve,  plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install UPVC riser pipes 16 bar with threaded M/F joint and diameter of 31.25mm.

description: Allow for supply and installation of pressure gauge and flow meter (Provisional Sum)

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: In-situ vibrated concrete 1:2:4 mix for base and dwarf column

description: 20mm diameter x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 60mm x 60mm x 5mm thick equal angle horizontal bracing

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: Provide, fabricate and erect steel ladder with hoops

description: Provide, fabricate and erect hand rail to cat walk to Engineer specifications

description: 300mm x 150mm x 8mm thick mild steel gusset plate

description: 300mm x 300mm x 8mm thick mild steel gusset plate

description: 600mm x 150mm x 8mm thick mild steel gusset plate

description: 16mm diameter bolt complete with nut and washer for gusset plate

description: Painting work with two coats of red oxide and aluminium

title: CONSTRUCTION OF WATER SUPPLY SCHEME AT IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

title: Actual Tendering for WATER SUPPLY SCHEME ATR IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

title: Bid opening for WATER SUPPLY SCHEME ATR IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

title: Bid Evaluation for WATER SUPPLY SCHEME ATR IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

procurementMethodRationale: AS STATED IN THE ADVERT

RYENA LIMITED

legalName: RYENA LIMITED

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for WATER SUPPLY SCHEME ATR IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

title: Request for proposal

description: Invitation for request for proposal for WATER SUPPLY SCHEME ATR IUBIUGHURU-IULEHA OWAN LGA, EDO STATE

description: Backfill and compact

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

title: WATER SUPPLY SCHEME

title: Assessment milestones for WATER SUPPLY SCHEME

description: Water Supply Scheme At Iubiughuru-Iuleha Owan Local Government Area Edo State

title: Approval milestones for CONSTRUCTION OF 7 UNITS OF CLASSROOMS AND INSTALLATION OF ICT EQUIPMENT FOR 7 SCHOOLS IN NORTHERN ZONE


name: MID-SOUTH DEVELOPMENT & INVESTMENT LIMITED

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community including report duly signed and stamped by a COMEG Registered Geologist.

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

title: Actual Tendering for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI ALAAFIA STREET AGBALUKU ARIGIDI, AKOKO N

title: Bid opening for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI ALAAFIA STREET AGBALUKU ARIGIDI, AKOKO N

title: Bid Evaluation for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI ALAAFIA STREET AGBALUKU ARIGIDI, AKOKO N

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI ALAAFIA STREET AGBALUKU ARIGIDI, AKOKO N

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI ALAAFIA STREET AGBALUKU ARIGIDI, AKOKO N

title: Assessment milestones for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR AT ARAROMI, ALAAFIA STREET, AGBALUKU ARIGIDI, AKOKO NORTH WEST LOCAL GOVERNMENT AREA, ONDO STATE

title: Approval milestones for Maintenace of AIB Head office Lagos and Enugu Regional office


description: Construction of mud pit, flow channels, rig up activities and dismantling on completion.

description: Construction of properly labelled sample box, collection of lithologic samples for analysis and submitted to the Planning and Design Department.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

title: Actual Tendering for 5NO. HAND PUMP BOREHOLES AT AKOKO EAST/SOUTH WEST FED. ONDO STATE

title: Bid opening for 5NO. HAND PUMP BOREHOLES AT AKOKO EAST/SOUTH WEST FED. ONDO STATE

title: Bid Evaluation for 5NO. HAND PUMP BOREHOLES AT AKOKO EAST/SOUTH WEST FED. ONDO STATE

INBOx CONCEPT LIMITED

legalName: INBOx CONCEPT LIMITED

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for 5NO. HAND PUMP BOREHOLES AT AKOKO EAST/SOUTH WEST FED. ONDO STATE

title: Request for proposal

description: Invitation for request for proposal for 5NO. HAND PUMP BOREHOLES AT AKOKO EAST/SOUTH WEST FED. ONDO STATE

title: Assessment milestones for CONSTRUCTION OF 5 NOS. HAND PUMP BOREHOLES AT AKOKO EAST / SOUTH WEST FEDERAL CONSTITUENCY ONDO STATE.  (LOT B418).

title: Approval milestones for Re- Engineering of AIB Website and Mobile Application


title: Actual Tendering for MOTORISED BOREHOLE WITH PLASTIC TANK AND GENERATOR AT ILEOLUJI/OKEIGBO/ODIGBO FED CONST. ONDO STATE

title: Bid opening for MOTORISED BOREHOLE WITH PLASTIC TANK AND GENERATOR AT ILEOLUJI/OKEIGBO/ODIGBO FED CONST. ONDO STATE

title: Bid Evaluation for MOTORISED BOREHOLE WITH PLASTIC TANK AND GENERATOR AT ILEOLUJI/OKEIGBO/ODIGBO FED CONST. ONDO STATE

description: CONSTRUCTION OF MOTORISED BOREHOLES WITH PLASTIC TANK AND GENERATORS AT ILE-OLUJI / OKEIGBO / ODIGBO FEDERAL CONSTITUENCY, ONDO STATE.

SATISFY INVESTMENT COMPANY LTD

legalName: SATISFY INVESTMENT COMPANY LTD

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for MOTORISED BOREHOLE WITH PLASTIC TANK AND GENERATOR AT ILEOLUJI/OKEIGBO/ODIGBO FED CONST. ONDO STATE

title: Request for proposal

description: Invitation for request for proposal for MOTORISED BOREHOLE WITH PLASTIC TANK AND GENERATOR AT ILEOLUJI/OKEIGBO/ODIGBO FED CONST. ONDO STATE

title: Assessment milestones for CONSTRUCTION OF MOTORISED BOREHOLES WITH PLASTIC TANK AND GENERATORS AT ILE-OLUJI / OKEIGBO / ODIGBO FEDERAL CONSTITUENCY, ONDO STATE

title: Approval milestones for Provision of 5 units of Wireless Internet Cloud with 1 year maintenance support in the SE zones


description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community including reports duly signed and sealed by a COMEG registered Geoscientist.

description: Construction of properly labelled sample box, collection of lithologic samples for analysis and submitted to Planning and Design Department.

title: CONSTRUCTION OF 3 NOS. HAND PUMP BOREHOLES AT EKITI SOUTH FEDERAL CONSTITUENCY 1 EKITI STATE.

title: Actual Tendering for 3NO. HANDPUMP BOREHOLES AT EKITI SOUTH  FEDERAL CONSTITUENCY I, EKITI STATE

title: Bid opening for 3NO. HANDPUMP BOREHOLES AT EKITI SOUTH  FEDERAL CONSTITUENCY I, EKITI STATE

title: Bid Evaluation for 3NO. HANDPUMP BOREHOLES AT EKITI SOUTH  FEDERAL CONSTITUENCY I, EKITI STATE

SIMEON & GEE ENGINEERING LIMITED

legalName: SIMEON & GEE ENGINEERING LIMITED

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for 3NO. HANDPUMP BOREHOLES AT EKITI SOUTH  FEDERAL CONSTITUENCY I, EKITI STATE

title: Request for proposal

description: Invitation for request for proposal for 3NO. HANDPUMP BOREHOLES AT EKITI SOUTH  FEDERAL CONSTITUENCY I, EKITI STATE

title: Assessment milestones for CONSTRUCTION OF 3NOS. HAND PUMP BOREHOLES AT EKITI SOUTH FEDERAL CONSTITUENCY 1 EKITI STATE

title: Approval milestones for Procurement of Memory Access Retrival System


title: CONSTRUCTION OF 8KM UGBOHA - AMALU RURAL ROAD WITH BRIDGE AND DRAINAGE, ESAN SOUTH EAST, EDO STATE.

description: Clear site on 1.0m either side of centre line of road of all bush, shrub, grass and trees including top soil to a maximum depth of 300m

description: Excavate any material except rock in cuttings and side drains haul excavated material any distance, deposit, spread in 150mm layers and compact to 100% BS compaction as filling for embankment and trim slopes to required cross sections. All measured as completed work to final situ.

description: Excavate from approved borrow pits / river sand and haul material any distance up to 5km, deposit, spread in 150mm layers and compact to 100% BS compaction as filling for embankment and margin, shape formation and trip slopes to required cross sections. All measured as completed work is final situ.

description: Excavate unsuitable material under embankment and drainage structure at as shown on the drawings and as directed by the Engineer's Representative and dispose as directed. Backfill under item 2.03.

title: Actual Tendering for CONSTRUCTION OF 8KM UGBOHA TO ORIA RURAL ROAD WITH A BRIDGE AND SIDE DRAINS,ESAN SOUTH EAST LGA ,EDO

title: Bid opening for CONSTRUCTION OF 8KM UGBOHA TO ORIA RURAL ROAD WITH A BRIDGE AND SIDE DRAINS,ESAN SOUTH EAST LGA ,EDO

title: Bid Evaluation for CONSTRUCTION OF 8KM UGBOHA TO ORIA RURAL ROAD WITH A BRIDGE AND SIDE DRAINS,ESAN SOUTH EAST LGA ,EDO

description: THE CONSTRUCTION OF 8KM UGBOHA - AMALU RURAL ROAD WITH BRIDGE AND DRAINAGE, ESAN SOUTH EAST, EDO STATE

SPRINGFIELD  LIMITED

legalName: SPRINGFIELD  LIMITED

description: EXPENDITURE

rationale: ROAD

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF 8KM UGBOHA TO ORIA RURAL ROAD WITH A BRIDGE AND SIDE DRAINS,ESAN SOUTH EAST LGA ,EDO

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF 8KM UGBOHA TO ORIA RURAL ROAD WITH A BRIDGE AND SIDE DRAINS,ESAN SOUTH EAST LGA ,EDO

title: Assessment milestones for CONSTRUCTION OF 8KM UGBOHA-AMALU RURAL ROAD WITH BRIDGE AND DRAINAGE, ESAN SOUTH EAST LGA, EDO STATE

title: Approval milestones for Supply of Office Stationery


title: Supply  of Tractor and Implements to Ekiti Central Senatorial District, Ekiti State

description: Supply of JX 75HP 2-Wheel Drive CASE Tractor / Messy Ferguson Tractor / Equipment

description: Supply of Baldan 3-Disc Plough

description: Supply of SP-20 Baldan Disc Harrow

description: Supply of SD-4 Disc Ridger

description: Supply of Baldan 3-Disc Plough

title: Actual Tendering for SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT

title: Bid opening for SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT

title: Bid Evaluation for SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT

MEGATOP NIGERIA LTD

legalName: MEGATOP NIGERIA LTD

description: EXPENDITURE

rationale: SUPPLY

title: Advert of Expression of Interest

description: Advert of Expression of Interest for SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT

title: Request for proposal

description: Invitation for request for proposal for SUPPLY MESSY FERGUSON (MF) TRACTORS TO EKITI CENTRAL SENATORIAL DISTRICT

description: Supply of Baldan 3-Disc Plough

description: Supply of SP-20 Baldan Disc Harrow

description: Supply of SD-4 Disc Ridger

description: Supply of Baldan 3-Disc Plough

title: Assessment milestones for SUPPLY OF TRACTOR AND IMPLEMENTS TO EKITI CENTRAL SENATORIAL DISTRICT, EKITI STATE.

title: Approval milestones for REHABILITATION WORKS AT THE HEADQUARTERS’ ADMINISTRATIVE BUILDING, OBAYANTOR, EDO STATE


description: WATER

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear and sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including two copies of report. Report should be submitted within one weeks of conducting the test.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client.

description: Provide and install Solar Powered Submersible pump SQ Flex series with solar modules to a total capacity of 1600W, 120 metres standard quality cable, cable joint kit and construction of support steel structure.

description: Provision of well head, pipe connection, valve,  plug for water metre and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install UPVC riser pipes 16 bar with threaded M/F joint and diameter of 31.25mm.

description: Allow for supply and installation of pressure gauge and flow meter (Provisional Sum)

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: 12mm diameter reinforcement bar

description: 20mm diameter x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 60mm x 60mm x 5mm thick equal angle horizontal bracing

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: Provide, fabricate and erect steel ladder with hoops

description: Provide, fabricate and erect hand rail to cat walk to Engineer specifications

description: 300mm x 150mm x 8mm thick mild steel gusset plate

description: 300mm x 300mm x 8mm thick mild steel gusset plate

description: 600mm x 150mm x 8mm thick mild steel gusset plate

description: 16mm diameter bolt complete with nut and washer for gusset plate

description: Painting work with two coats of red oxide and aluminium

description: Supply and erection of corrugated steel tank of capacity 22.5 cubic meters from not less than 4mm thick mild steel plate together with cover internally braced. Externally flanged complete with all necessary accessories. Bolts, nuts, washers, manhole. Water level indicator, etc.

description: Transportation of all fabricated components to site

description: Supply and fix a complete set of plumbing pipes and fittings to water tank of 6m structure steel tower inlet and outlet piping system plus washout and overflow. All pipes to be UPVC 16 bars

description: Provide and install 40 metres chain linked perimeter fence (3mm thick and 2.4m high wire gauze) mounted on two (3Nos.) courses of rendered block wall in 100mm thick concrete foundation. Chain link fence braced vertically at 3metres centre to centre & horizontally at the top with 50mm galvanized steel pipe.

description: Provision of ten service taps as collection point and connection to borehole in concrete platform with 150mm PVC floor drain connected to 1.2 x 1.2 x 1.5m deep, soak away pit as directed by the Engineer

title: CONSTRUCTION OF SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENETORIAL DISTRICT, ONDO STATE

title: Actual Tendering for CONSTRUCTION OF  SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE.

title: Bid opening for CONSTRUCTION OF  SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE.

title: Bid Evaluation for CONSTRUCTION OF  SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE.

description: WATER SUPPLY

submissionMethodDetails: AS STATED IN ADVERTISEMENT

XQUIZIT TECHNOLOGIES LTD

legalName: XQUIZIT TECHNOLOGIES LIMITED

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF  SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE.

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF  SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE.

description: Backfill and compact

description: 12mm diameter reinforcement bar

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

title: Assessment milestones for CONSTRUCTION OF SOLAR POWERED BOREHOLE IN ONDO CENTRAL SENATORIAL DISTRICT, ONDO STATE

description: WATER

title: Approval milestones for REHABILITATION OF ACCESS ROAD (EARTH ROAD) TO ISUA COMMUNITY (ISUA IRRIGATION PROJECT), EDO STATE


description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and / or electromagnetic methods to select most suitable site for drilling a productive borehole within the community including report duly signed and stamped by a COMEG Registered Geologist.

description: Clear project site of all bushes, Vegetation, and rubbish including grubbing out roots and disposed as directed.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

title: Actual Tendering for PROVISION OF SOLAR POWERED BOREHOLE AT EKO-IYOBHEBHE, ESAN CENTRAL LGA, EDO STATE.

title: Bid opening for PROVISION OF SOLAR POWERED BOREHOLE AT EKO-IYOBHEBHE, ESAN CENTRAL LGA, EDO STATE.

title: Bid Evaluation for PROVISION OF SOLAR POWERED BOREHOLE AT EKO-IYOBHEBHE, ESAN CENTRAL LGA, EDO STATE.

PLANNET GOLD LIMITED

legalName: PLANNET GOLD LIMITED

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for PROVISION OF SOLAR POWERED BOREHOLE AT EKO-IYOBHEBHE, ESAN CENTRAL LGA, EDO STATE.

title: Request for proposal

description: Invitation for request for proposal for PROVISION OF SOLAR POWERED BOREHOLE AT EKO-IYOBHEBHE, ESAN CENTRAL LGA, EDO STATE.

title: Assessment milestones for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT EKO IYOBHEBHE (IRRUA), ESAN CENTRAL LOCAL GOVERNMENT AREA,  EDO STATE

title: Approval milestones for AWARD OF CONTRACT FOR THE SUPPLY OF COMPUTER LABORATORY WORKSHOP TOOLS


title: INSTALLATION OF SOLAR POWER STREET LIGHT

description: 120 Watts Solar Module Monocytalline

description: 60 Watts/24volts LED lamp with lamp housing (tempered glass covering)

description: Controller (including constant current) with light control

description: 12 Volts - 100AH deep cycle, sealed battery

description: Battery Box compartment with locking arrangement (Anti-pilfering) attached to pole painted with high quality corrosion resistant paint (Bright Aluminiumcolour of Berger paint or it eqeuivalent) with two coat of primer (Berger Red Oxide or equivalent)

title: Actual Tendering for CONSTRUCTIONOF 150 NOS SOLAR POWERED STREET LIGHT IN UHUNMWONDE LGA EDO STATE - LOT B7.

title: Bid opening for CONSTRUCTIONOF 150 NOS SOLAR POWERED STREET LIGHT IN UHUNMWONDE LGA EDO STATE - LOT B7.

title: Bid Evaluation for CONSTRUCTIONOF 150 NOS SOLAR POWERED STREET LIGHT IN UHUNMWONDE LGA EDO STATE - LOT B7.

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTIONOF 150 NOS SOLAR POWERED STREET LIGHT IN UHUNMWONDE LGA EDO STATE - LOT B7.

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTIONOF 150 NOS SOLAR POWERED STREET LIGHT IN UHUNMWONDE LGA EDO STATE - LOT B7.

description: 120 Watts Solar Module Monocytalline

title: Assessment milestones for PROVISION OF SOLAR POWER STREET LIGHTS IN SELECTED LOCATIONS IN ESAN NORTH EAST/ESAN SOUTH EAST FEDERAL CONSTITUENCY, EDO STATE  (LOT B603).

title: Approval milestones for Construction of 7 units of Classroom and installation of classroom and installation of ICT Equipment in SE


title: CONSTRUCTION OF MOTORISED  BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET , IRO QUARTERS, OFF COLLEGE ROAD, IKERE EKITI

description: WATER SUPPLY

description: Construction of mud pit, flow     channels, rig up activities and dismantling on completion.

description: Construction of properly labelled sample box, collection of lithological samples for analysis and submitted to the Planning and Design Department.

description: Drilling of 250mm open hole through overburden and weathered rock to the rock head to accommodate 225mm temporary casings

description: Provision, installation and retrieval of temporary casing (225mm)

description: Drilling of 150mm Hole through fractured basement and fresh crystalline rocks from rock head to total depth of 35m

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) UPVC Casing

description: Provide and install OD 125mm x 7.5mm (Trapezoidal threaded on both sides – M/F) Slotted UPVC Screen

description: Provide and place approved uniformly size  rice gravel  (not granite chipping)

description: Place cement and sand slurry as grout around casing to depth of 4 meters (see attached drawing).

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around the casing (see attached drawing).

description: Development of borehole by backwashing, surging, jetting and airlifting methods until water is clear, sand free and non-turbid.

description: Pumping test of well for at least 24 hours (Constant pumping rate test) by a COMEG certified Hydrogeologist including two copies of report. Report should be submitted within one weeks of conducting the test.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s approved laboratory. Water sample to be collected by Client’s Representative. (Provisional Sum)

description: Provide for four copies of complete technical reports including progress photographs to be collated by the client.

description: Provide and install Submersible pump of 0.5 HP capacity, 120 metres standard quality cable, cable joint kit and accessories.

description: Supply and install 2.5KVA original Japan Elegance Generator.

description: Provision of well head, pipe connection, valve,  plug for water metre and wash out

description: tProvide for the construction of protective cage against theft of borehole submersible pump ( See attached drawing)

description: Provide for the construction of protective operational switch box for the solar panel switch (See attached drawing)

description: Supply and install UPVC riser pipes 16 bar with threaded M/F joint and diameter of 31.25mm.

description: Allow for supply and installation of pressure gauge and flow meter (Provisional Sum)

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact	0.5	m3	500	250.00

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: 20mm diameter x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 60mm x 60mm x 5mm thick equal angle diagonal cross bracing to stanchion length 3.61m

description: 60mm x 60mm x 5mm thick equal angle horizontal bracing

description: 203mm x 133mm x 25Kg/m UB in primary beam in platform of tower each 4.4m long

description: 152mm x 89mm x 16Kg/m UB in secondary beam in platform of tower each 4.4m long

description: 3mm thick mild steel chequered plate on platform and landing

description: Provide, fabricate and erect steel ladder with hoops

description: Provide, fabricate and erect hand rail to cat walk to Engineer specifications

description: 300mm x 150mm x 8mm thick mild steel gusset plate

description: 300mm x 300mm x 8mm thick mild steel gusset plate

description: 600mm x 150mm x 8mm thick mild steel gusset plate

description: 16mm diameter bolt complete with nut and washer for gusset plate

description: Painting work with two coats of red oxide and aluminium

description: Supply and erection of corrugated steel tank of capacity 22.5 cubic meters from not less than 4mm thick mild steel plate together with cover internally braced. Externally flanged complete with all necessary accessories. Bolts, nuts, washers, manhole. Water level indicator, etc.

description: .Transportation of all fabricated components to site

title: CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QAURTERS , OFF

title: Actual Tendering for CONSTRUCTION OF MOTORIZES BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QUARTERS OFF C

title: Bid opening for CONSTRUCTION OF MOTORIZES BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QUARTERS OFF C

title: Bid Evaluation for CONSTRUCTION OF MOTORIZES BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QUARTERS OFF C

description: WATER SUPPLY

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF MOTORIZES BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QUARTERS OFF C

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF MOTORIZES BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QUARTERS OFF C

description: Backfill and compact	0.5	m3	500	250.00

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

title: Assessment milestones for CONSTRUCTION OF MOTORISED BOREHOLE AND GENERATOR IN OTUNBA GBENGA ADEBAYO STREET, IRO QAURTERS, OFF COLLEGE ROAD, IKERE EKITI EKITI STATE

description: WATER

title: Approval milestones for AWARD OF CONTRACT FOR THE SUPPLY, INSTALLATION AND TEST-RUN OF PRINTERS


title: DRILLING OF 2 NOS. MOTORISED BOREHOLES AND 10,000 GALLONS OVERHEAD TANK ,EDO CENTRAL SENATORIAL DISTRICT

description: WATER SUPPLY

description: Provide for reconnaissance, geological, hydrogeological and hydrogeophysical investigation using electrical, magnetic and/or electromagnetic methods to select most suitable site for drilling a productive borehole within the community.

description: Clear project site of all bushes, Vegetation, and rubbish including grubbing out roots and disposed as directed.

description: Mobilisation of equipment, materials and personnel to site and demobilisation on completion of works.

description: Construction of sample boxes, collection of lithologic samples for analysis and submitted to the client.

description: 0 – 100

description: 100 - 200

description: 200 – 300

description: Allow for circulation loss (Provisional)

description: Geoelectric logging of open well (Provisional)

description: Supply and install 200mm diameter API standard steel casing pipes.

description: Provide and install 200mm diameter Johnson stainless steel well screen.

description: Provide and place approved uniform size graded rice gravel (Not Granite Chips) in the annulus around the borehole column.

description: Back filling of annulus with appropriate material (clean whitish sand materials free from incrustations according to Engineer’s specification) around the casing up to 4 meters to the surface.

description: Place cement and sand slurry around casing as grout to a depth of 4 meters.

description: Place 0.6m x 1m x 1m mass concrete slab of mix ratio 1:2:4 around casing.

description: Development of borehole by backwashing, surging, jetting and airlifting method until water is clear and sand free and non-turbid.

description: Pumping test of well for at least 24 hours (multi stage pumping test, 3 stages) by a COMEG certified Hydrogeologist including four copies of report. Report should be submitted within one weeks of conducting the test.

description: Provide for chemical and microbiological analysis of water sample from the borehole at the client’s Laboratory. Water sample to be collected by client’s representative. (Provisional Sum).

description: Provide and install 7.5HP groundfos submersible pump with a delivery head of not less than 270m and discharge of not less than 2m3/hour, with starter, 300 metres standard quality cable (10mm X 4), cable joint kit and construction of support steel structure.

description: Provide for well head, pipe connection, valve, pressure gauge, and wash out

description: Provide for the construction of protective cage against theft of borehole submersible pump (See attached drawing).

description: Provide for the construction of protective cage operational switch box for the solar panel switch (See attached drawing).

description: Provide and install 50mm diameter steel risers with flanged joint with coupling accessories and well coated with anti-rust paint.

description: Allow for supply and installation of pressure gauge and flow meter (Provisional Sum)

description: Clear site of all bushes vegetation trees and rubbish including grubbing out root and dispose as directed

description: Excavation of existing soil to maximum of 1.5m for isolated pad footing

description: Backfill and compact

description: Remove surplus excavated material from site for re-use

description: 50mm thick blinding with concrete of 1:3:6 mix

description: Formwork-generally plain finish on vertical sides of bases and column

description: 12mm diameter reinforcement bar

description: In-situ vibrated concrete 1:2:4 mix for base and dwarf column

description: 20mm diameter x 750mm long hold down bolt embedded in the column base

description: Removal of form work from casing and subsequent removal from site

description: 20mm mild steel base plate 352mm x 352mm welded to the stanchion base

description: 10mm mild steel plate as end cap

description: 152mm x 152mm x 30Kg/m UC Stanchion 6.0m long each

description: 16mm dia bolt complete with nut and washer for gusset plate

description: Transportation of all fabricated components to site

description: Supply and fix a complete set of plumbing pipes and fittings to water tank of 6m structure steel tower inlet and outlet piping system plus washout and overflow. All pipes to be UPVC 16 bars

description: Provide and install 40 metres chain linked perimeter fence (3mm thick and 2.4m high wire gauze) mounted on two (3Nos.) courses of rendered block wall in 100mm thick concrete foundation. Chain link fence braced vertically at 3metres centre to centre & horizontally at the top with 50mm galvanized steel pipe.

description: Provision of ten service taps as collection point and connection to borehole in concrete platform with 150mm PVC floor drain connected to 1.2 x 1.2 x 1.5m deep, soak away pit as directed by the Engineer

description: Excavation to level of foundation in all class of materials at the site not exceeding 1m

description: Remove surplus excavated materials from site as directed by Engineer

description: Provide and place 1:3:6 concrete mix as foundation footing to receive block work

description: Provide and lay foundation block wall  (225mm thick) from footing to DPC level

description: Fill excavated foundation with approved materials and compact

description: Provide and place (1:2:4) concrete mix for DPC reinforce concrete Plinth for generator

description: Provide and lay 225mm thick sand Crete blocks embedded in cement and sand mortar (1:6 ratio)

description: Provide and place Concrete work for lintel 1:2:4 concrete mix

description: Provide, cut and place reinforcement for lintel

description: Provide and place 75mm x 100mm treated hardwood wall plate

description: Provide and place 50mm x 100mm treated hardwood Rafter, and tie beam

description: Provide and place 50mm x 100mm treated hardwood tie strut and other bracing

description: Provide and place 50mm x 50mm treated hardwood purlin

description: Provide and place Asbestos roofing sheet

description: Provide and place well planed treated hardwood fascia board

description: Provide and fix double swing steel  doors 1800mm x 2100mm (see attached drawing for details)

description: Provide and place fancy block to allow for ventilation in mortar of mix (1:6)

description: Allow for electrical installation. Wiring of the generator set house: five lighting points with energy saver bulbs and 2 nos. 15Amps socket use only Nigeria or Curtis wire)

description: Screed floor with sand cement mortar 12mm thick

description: Plastering to be done internally and externally

description: Paint the plastered wall internally and externally with high quality emulsion paint

description: Provide and install 40 metres chain linked perimeter fence (3mm thick and 2.4m high wire gauze) mounted on two (2Nos.) courses of rendered block wall in 100mm thick concrete foundation. Chain link fence braced vertically at 3metres centre to centre & horizontally at the top with 50mm galvanized steel pipe.

description: Supply and install 10KVA diesel engine powered Lister/Perkins (England) generating set with installation materials which include:

description: Allow for PHCN connection

title: DRILLING OF 2 NOS. MOTORISED BORECHOLES AND 10,000 GALLONS OVERHEAD TANK, EDO CENTRAL SENATORIAL DIS

title: Actual Tendering for DRILLING OF 2NOS MOTORIZED BOREHOLE AND 10,000 GALLON OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT

title: Bid opening for DRILLING OF 2NOS MOTORIZED BOREHOLE AND 10,000 GALLON OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT

title: Bid Evaluation for DRILLING OF 2NOS MOTORIZED BOREHOLE AND 10,000 GALLON OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT

description: WATER SUPPLY

KADYET NIG. LTD

legalName: KADYET NIG. LTD

description: EXPENDITURE

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for DRILLING OF 2NOS MOTORIZED BOREHOLE AND 10,000 GALLON OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT

title: Request for proposal

description: Invitation for request for proposal for DRILLING OF 2NOS MOTORIZED BOREHOLE AND 10,000 GALLON OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT

description: 0 – 100

description: 100 - 200

description: 200 – 300

description: Backfill and compact

description: 12mm diameter reinforcement bar

description: 10mm mild steel plate as end cap

description: Allow for PHCN connection

title: Assessment milestones for DRILLING OF 2NOS. MOTORISED BOREHOLES AND 10,000 GALLONS OVERHEAD TANK, EDO CENTRAL SENATORIAL DISTRICT, EDO STATE

description: WATER

title: Approval milestones for  Construction of Hand Pump Boreholes In Asewele-Korede, Ago Alaye, Iju-Odo, Koseru,+ Aba-Panu In Ondo South Senatorial District


description: ROAD CONSTRUCTION

description: MOBILIZATION/DEMOBILIZATION Allow for mobilization and demobilisation of equipment to and from site respectively

description: Clear roadway (7.2m width) of weeds and top soil to receive fill material not exceeding 150mm and cart away from site

description: Provide, spread and compact earth material on the un-surfaced  part of the road as directed by the Engineer

description: Grade road way (6m width) to camber shape and compact as directed by the Engineer

description: Excavate in any material except rock for  drains to any depth and cart away surplus as directed

description: Provide and place (50mm thick) concrete grade 15 on levelled excavated floor as blinding

description: Provide and place concrete grade 25 in 600mm x 600mm x 100mm thick R.C. drain with concrete wall on both sides.

description: Ditto but 10mm bar

description: Provide and fix wrought shuttering to walls of drains.

description: Ditto but 10mm bar

description: Provide and place concrete grade 25 in cover slabs

description: Provide and fix according to the drawings, high tensile steel reinforcement to drains: 12mm bar @ 150 c/c

description: Provide and apply MCO/MC1 at 0.9litres/m2 and blind with sand or quarry dust.

description: .Provide and lay at 60mm thick hot rolled asphalt (HRA) at appropriate temperature

description: house

description: SHIP

title: Actual Tendering for CONSTRUCTION OF 1KM BY 6M ASPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD IKERE, EKITI STATE.

title: Bid opening for CONSTRUCTION OF 1KM BY 6M ASPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD IKERE, EKITI STATE.

title: Bid Evaluation for CONSTRUCTION OF 1KM BY 6M ASPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD IKERE, EKITI STATE.

description: ROAD CONSTRUCTION

BILIJOE + BERGER NIG. LTD

legalName: BILIJOE + BERGER NIG. LTD

description: EXPENDITURE

rationale: ROAD

title: Advert of Expression of Interest

description: Advert of Expression of Interest for CONSTRUCTION OF 1KM BY 6M ASPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD IKERE, EKITI STATE.

title: Request for proposal

description: Invitation for request for proposal for CONSTRUCTION OF 1KM BY 6M ASPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD IKERE, EKITI STATE.

description: Ditto but 10mm bar

description: Ditto but 10mm bar

description: house

description: SHIP

title: Assessment milestones for CONSTRUCTION OF 1KM BY 6M ASHPHALT ROAD AT OTUNBA ADESIKUOLA SAMUEL ROAD, IKERE, EKITI STATE

description: ROAD CONSTRUCTION

title: Approval milestones for Production of Accident and Incident Investigation Report


description: SUPPLY OF DIESEL DISPENSING PUMP

description: Supply and install, double nozzle, double electric motor Digital Diesel Dispensing pump

description: Allow for the installation of existing pms Dispensing pump and Area office Asaba

description: CONSTRUCTION OF BOREHOLE

title: ILLAH-EBU IRRIGATION PROJECT

title: Actual Tendering for ILLAH-EBU IRRIGATION PROJECT

title: Bid opening for ILLAH-EBU IRRIGATION PROJECT

title: Bid Evaluation for ILLAH-EBU IRRIGATION PROJECT

description: SUPPLY OF DIESEL DISPENSING PUMP

procurementMethodRationale: IRRIGATION PURPOSE

Y-COM  TECHNOLOGIES  LTD

legalName: Y-COM  TECHNOLOGIES  LTD

BENIN/ OWENA RBDA

legalName: BENIN/ OWENA RBDA

project: ILLAH-EBU IRRIGATION PROJECT

description: ILLAH-EBU IRRIGATION PROJECT

rationale: IRRIGATION PURPOSE

title: Advert of Expression of Interest

description: Advert of Expression of Interest for ILLAH-EBU IRRIGATION PROJECT

title: Request for proposal

description: Invitation for request for proposal for ILLAH-EBU IRRIGATION PROJECT

description: CONSTRUCTION OF BOREHOLE

title: Assessment milestones for Illah-Ebu Irrigation Project (Supply and Installation of Diesel Pump)

description: SUPPLY OF DIESEL DISPENSING PUMP

title: Approval milestones for CONTRACT FOR THE REPLACEMENT OF 3NOS. HIGH LIFT PUMPS (Q-90M3/HR H=75), REPLACEMENT OF 5.2KM LONG AC PIPE RISING MAIN WITH DUCTILE IRON PIPE 225MM DIA


description: AWARD FOR THE PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENETORIAL DISTRICT, OSUN STATE

description: Allow for project signboards as directed

description: Allow for the project photograph as directed

description: Capacity building

description: Maintenance and running of project vehicle

description: Allow for sundry services to Engineers representative

description: Allow for test running, for commissioning and handing-over

description: Allow for payment of wages to Engineers casual staff

description: Allow for project auditing and monitoring

description: Provide and install solar street lights at 20metres apart with each comprising of the following components: Provide and install  all-in-one 80W integrated solar powered street light

description: Galvanised iron pole painted with High quality corrosion resistant paint (Bright Aluminium colour of Berger or equivalent paint) with two coats of primer (Berger Red Oxide or equivalent).

description: 1:2:4 concrete footing measuring 400mm x 400mm x 800mm depth, reinforced with 10mm high tensile steel rod (4Y10 @ 100mm c/c with 10mm stirrup at 200mm c/c) and 4No. 16mm hold down bolts.

description: Allow for the cost excavation, accessories and installation (cost to include facilitator’s pictures and name)

title: Provision and Installation of All-In-One Integrated Solar Street Light in Osun East Senatorial Distr

title: Actual Tendering for PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENATORIAL DISTR

title: Bid opening for PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENATORIAL DISTR

title: Bid Evaluation for PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENATORIAL DISTR

description: INSTALLATION OF SOLAR STREET LIGHTS

Samkay Engineering Co. Limited

legalName: Samkay Engineering Co. Limited

description: PROVISION OF STREET LIGHT

rationale: LIGHT

title: Advert of Expression of Interest

description: Advert of Expression of Interest for PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENATORIAL DISTR

title: Request for proposal

description: Invitation for request for proposal for PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENATORIAL DISTR

description: Capacity building

title: Assessment milestones for NOTIFICATION OF AWARD OF CONTRACT FOR THE PROVISION AND INSTALLATION OF ALL-IN-ONE INTEGRATED SOLAR STREET LIGHT IN OSUN EAST SENETORIAL DISTRICT, OSU

title: Approval milestones for CONTRACT FOR THE CONSTRUCTION OF BOREHOLE IN AGUA IRRUA WATER SCHEME, EDO STATE


description: CONSTRUCTION OF SOLAR POWERED BOREHOLE AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE, 2. ITA OWODE, OWODE, EFON ALAAYE 3. ST PAUL’S IDAGBA, EFON ALAAYE, EKITI STATE.

description: Supply and install the Complete Semi-Automated Bottle filling line at Akure Area Office

title: Actual Tendering for PROVISION OF MOTORISED BOREHOLES AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE EKITI STATE 2. ITA OWODE

title: Bid opening for PROVISION OF MOTORISED BOREHOLES AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE EKITI STATE 2. ITA OWODE

title: Bid Evaluation for PROVISION OF MOTORISED BOREHOLES AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE EKITI STATE 2. ITA OWODE

description: Construction of Solar Powred Borehole at 1. Oke Oliyo, OLiyo Itaore, Efon Alaaye, 2, Ita Owode, owode, Efon Alaaye 3. St. Paul’s Idagba, Efon Alaaye, Ekiti State

GREEN HOMES DYNAMICS  RESOURCES LIMITED

legalName: GREEN HOMES DYNAMICS  RESOURCES LIMITED

description: PROVISION OF WATER

rationale: WATER

title: Advert of Expression of Interest

description: Advert of Expression of Interest for PROVISION OF MOTORISED BOREHOLES AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE EKITI STATE 2. ITA OWODE

title: Request for proposal

description: Invitation for request for proposal for PROVISION OF MOTORISED BOREHOLES AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE EKITI STATE 2. ITA OWODE

title: Assessment milestones for CONSTRUCTION OF SOLAR POWERED BOREHOLE AT 1. OKE OLIYO, OLIYO ITAORE, EFON ALAAYE, 2. ITA OWODE, OWODE, EFON ALAAYE 3. ST PAUL’S IDAGBA, EFON ALAAYE,

title: Approval milestones for AWARD OF CONTRACT FOR THE REHABILITATION OF FUNTUA - DANDUME - KADUNA STATE BORDER ROAD IN KATSINA STATE


title: PROCUREMENT OF EQUIPMENT FOR FARM LAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN CITY, EDO STATE.

description: Supply of New Holland 70-56 or equivalent, 85 HP 4-wheel drive Tractor with accessories and Repair/Maintenance manual.

description: (A) Set of Chrome Vanadium Sockets (1-Black & 1-White) 6mm-32mm.

description: (B) Chrome Vanadium Flat Spanners

description: Chrome Vanadium Flat Spanners

title: Actual Tendering for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN, EDO STATE

title: Bid opening for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN, EDO STATE

title: Bid Evaluation for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN, EDO STATE

FORIMADE AND  KOLAT SERVICES LTD

legalName: FORIMADE AND  KOLAT SERVICES LTD

description: EXPENDITURE

rationale: PREPARATION OF FARMLAND

title: Advert of Expression of Interest

description: Advert of Expression of Interest for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN, EDO STATE

title: Request for proposal

description: Invitation for request for proposal for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN, EDO STATE

description: (B) Chrome Vanadium Flat Spanners

description: Chrome Vanadium Flat Spanners

title: Assessment milestones for PROCUREMENT OF EQUIPMENT FOR FARMLAND CLEARING AND PREPARATION IN THE HEADQUARTERS, BENIN CITY, EDO STATE

title: Approval milestones for CONTRACT FOR THE CONSTRUCTION OF SOLAR POWERED BOREHOLE AT UROMI GENERAL HOSPITAL, UROMI, EDO STATE